Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Cole Parmer Stir-Pak 04555-00
Summary of Contents for Cole Parmer Stir-Pak 04555-00
- Page 1 OPERATING MANUAL ® ® Cole-Parmer Stir-Pak General-Purpose Laboratory Mixer Model Number 04555-00 Cole-Parmer 625 East Bunker Court Vernon Hills, Illinois U.S.A. 60061-1844 Toll-Free: 800-323-4340 Phone: 847-549-7600 Fax: 847-247-2929 www.coleparmer.com E-mail: techinfo@coleparmer.com 2772.1A...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS • High voltages exist and are accessible in the power supply. Contact Cole-Parmer for servicing. • Do not operate mixers where explosive vapors or flammable materials exist. Death or serious injury could result. Check NEC and local codes before installing. -
Page 3: Installation And Setup Procedures
INTRODUCTION The Stir-Pak 04555-00 mixing system covered in this manual consists of a combined mixer head and analog controller for 115VAC operation. 04555-00 STIR-PAK CONTROLLER The variable-speed controller, Figure 1, is used to turn on and set the speed of the mixer head and provides a 100:1 adjustment range. - Page 4 Note: The mixer is now ready to be attached to a support stand or to a tank clamp (not supplied). Recommended stands, tank clamps, and a double (rod) clamp are available through Cole-Parmer. Part numbers are listed in the ACCESSORIES section.
- Page 5 Figure 3. Typical mixer setup using a support stand Note: The power supply can be placed on any flat surface within six feet of the mixer. • Check that all cords are clear of any moving parts and not subject to splashes or spills. 7.
-
Page 6: Stir-Pak Mixer Operation
STIR-PAK MIXER OPERATION POWER Indicator Mixer Head The green LED indicator illuminates whenever the SPEED control is turned past 1. POWER Indicator Power Supply The green LED indicator illuminates whenever the power supply is energized. SPEED Control The SPEED control precisely sets the output speed of the shaft. The controller has a range of 100:1 depending on the shaft;... -
Page 7: Specifications
SPECIFICATIONS Direction of Rotation: Counterclockwise as viewed from the chuck end Speed Range: 40 to 4000 rpm Torque Output, max: 7 in-oz Continuous 9.5 in-oz Intermittent High Speed Shaft Mixer Shaft Interface: Three-jawed type chuck with key accepts 5/16 in. to 3/8 in. diameter shaft Power Supply Input Voltage: 100 to 132 V AC, 60 Hz Power Supply Input Current, max:... -
Page 8: Maintenance And Troubleshooting
Any damages resulting from improper packaging are your responsibility. TECHNICAL ASSISTANCE If you have any questions about the use of this product, contact Cole-Parmer or your local dealer. -- 8 --...
Need help?
Do you have a question about the Stir-Pak 04555-00 and is the answer not in the manual?
Questions and answers