Table of Contents
Advertisement
3.2.2 Acceleration & deceleration control
0
2
2
［ Data type ］ Word axis
［ Data meaning ］
max. speed of X rapid traverse (radius value)
［ Data unit ］
［ Data range ］
10 ～ 99999999
0
2
3
［ Data type ］
Word axis
［ Data meaning ］ Acceleration/deceleration time constant value
［ Data unit ］
ms
［ Data range ］ 10 ～ 4000
0
2
7
［ Data meaning ］
Upper limit of cutting feedrate
［ Data unit ］
Setting unit
Metric machine
Inch machine
［ Data range ］
Metric machine
Inch machine
0
2
9
［ Data meaning ］
Acceleration/deceleration time constant during cutting feed and manual feed
［ Data unit ］
ms
［ Data range ］
0 ～ 4000
0
3
0
［ Data meaning ］
The starting speed of cutting feed
［ Data unit ］
Setting unit
Metric machine
Inch machine
［ Data range ］
396
GSK980TDc Turning CNC System User Manual
RPDFn
Setting unit
Data unit
Metric machine
mm/min
Inch machine
0.1inch/min
LINTn
FEDM
Data unit
mm/min
0.1inch/min
IS-B
10 ～ 15000
5 ～ 5800
FEEDT
FEDFL
Data unit
mm/min
0.1inch/min
IS-B
IS-C
10 ～ 15000
10 ～ 5800
IS-C
Advertisement
Table of Contents
Need help?
Do you have a question about the GSK980TDc and is the answer not in the manual?
Questions and answers
How do I set the Machine to Machine the soft jaws on the chuck?
To machine the soft jaws on the chuck using the GSK980TDc CNC system, follow these steps:
1. Set the Clamping Mode: If using hydraulic clamping, ensure the correct mode (inner or outer chuck) is selected. Adjust system parameters if switching between internal and external clamping.
2. Install the Soft Jaws: Mount the soft jaws onto the chuck and secure them properly.
3. Set Workpiece Coordinates: Define the workpiece coordinate system according to the machining process. Ensure alignment with the chuck.
4. Program the Machining Process: Create a CNC program to machine the soft jaws accurately. Use appropriate cutting tools such as rough turning, finish turning, and grooving tools.
5. Adjust Machining Parameters: Set spindle speed, feed rate, and cutting depth according to the material and tool specifications.
6. Run the Program: Start the machining process while monitoring for accuracy and stability.
7. Verify Jaw Fitment: After machining, check the jaws to ensure they properly grip the workpiece.
These steps ensure the soft jaws are machined correctly for precise clamping.
This answer is automatically generated