Page 1 Xfinity Li-ION 20V 7PC CORDLESS KIT Instruction Manual MODEL NUMBER CKT718A 1300 889 028 info.aldi@positecgroup.com Version number: 004 CKT718A 2323 05/2019...
Page 2: Table Of Contents
The contents of all Instruction Manual 20V Battery And Battery Charger 20V Drill/Driver 20V Impact Driver 20V Circular Saw 20V Detail Sander 20V LED Torch 20V Bluetooth Speaker 20V USB Charger...
Page 3: Battery And Battery Charger
Xfinity Li-ION 20V Battery And Battery Charger Instruction Manual MODEL NUMBER JLH122200370S& IMPORTANT Z10&ABP1815MA Read carefully before use Version number: 004 Keep for future reference...
Page 4 Failure to do so could result in serious personal injury. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019...
Page 5 20V Battery And Battery Charger Warranty Details REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION The product is guaranteed to be free from defects in workmanship and par ts for a period of 60 months f rom the date of purchase.
Page 6 Package Content List Parts description Description of symbols General safety warnings Operation Maintenance Warranty Environmental protection Accessories and After Sales Parts FAQ/Troubleshooting Technical Specifications AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019...
Page 7: Application
WARNING! To reduce risk of injury, only use the supplied battery and charger or any ALDI Xfinity Plus 20V Li-ion Battery or Battery Charger. Other type of battery packs may burst causing personal injury and damage.
Page 8: Parts Description
3. Parts description Battery Charger Adaptor Plug Park Charger Charging indicator light Battery pack Battery pack release button AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019...
Page 9: Description Of Symbols
Polarity. Waste electrical products should not be disposed of with household waste. Li-I on AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019...
Page 10: General Safety Warnings
10. Do not open the unit and keep out of the reach of children. 11. Do not charge the batteries of other manufactures or ill-suited models. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019...
Page 11 Do not expose battery pack to heat or fire. Avoid storage in direct sunlight. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019...
Page 12 When disposing of battery packs, keep battery packs of different electrochemical systems separate from each other. n) Recharge only with the charger supplied or any ALDI Xfinity Plus 20V Chargers. Do not use any charger other than that specifically provided for use with the equipment.
Page 13: Operation
The only other battery or chargers that these components are compatible with is any ALDI Xfinity Plus 20V Li-ion Battery or Battery Charger. Never insert or allow metallic objects into your charger or battery connections because an electrical failure and hazard will occur.
Page 14 The ambient temperature range for tool, battery use and storage is 0 C-45 The recommended ambient temperature range for the charging system during charging is 0 C-40 AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019...
Page 15: Maintenance
Charger easy and safe to operate, and, with proper care, it will give you many years of dependable service. CAUTION. Carefully read through this entire instruction manual AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019...
Page 16 TEL: 1300 889 028 Service Support If you have any issues with the operation of your Battery or Charger, please call us on 1300 889 028 for advice, or email us at info.aldi@positecgroup.com AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.:...
Page 17: Environmental Protection
It’s a result of the This is normal. gets warm when stepping down of the charging. chemical reactions inside the batteries during the charging process. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019...
Page 18: Technical Specifications
Charger output 22VDC 370mA Charging time Ready for use in 4-6 Hours Protection class Charger weight 0.49 kg Other Compatible Charger Models All ALDI Xfinity Plus 20V Lithium-Ion Chargers Battery Voltage Max. Battery capacity 1.5Ah, Li-Ion Battery Model Number ABP1815MA Battery weight 0.38 kg...
Page 19 Standards: 1. Charger: Safety: IEC60335-1 IEC60335-2-29 AS/NZS 60335.1 AS/NZS 60335.2.29 EMC: EN55014-1 EN55014-2 EN61000-3-2 EN61000-3-3 2. Battery: IEC 62133-2: 2017 AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019...
Page 20 Xfinity Li-ION 20V Cordless drill / driver Instruction Manual IMPORTANT MODEL NUMBER CDT218XA.9 Read carefully before use Version number: 004 Keep for future reference...
Page 21 Failure to do so could result in serious personal injury. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 22 20V Li-Ion Cordless Drill / Driver Warranty Details REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the date of purchase.
Page 23 Package Content List Parts description Description of symbols General Safety Warnings Important information – Product care Assembly Operation Maintenance Warranty Environmental protection FAQ/Troubleshooting Technical Specifications AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 24: Package Content List
WARNING! To reduce risk of injury, only use the supplied 20V Li-Ion battery or charger or any ALDI Xfinity Plus range of 20V Li-Ion battery packs. Other type of battery packs may burst causing personal injury and damage.
Page 25: Parts Description
Battery pack release button Two-speed gear selector LED light Forward/Reverse rotation control 10. Trigger switch Soft grip handle 11. Double ended bit Belt clip AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 26: Description Of Symbols
Warning Wear ear protection Wear eye protection Wear breathing protection Conforms to relevant standards for electrical safety and electromagnetic compatibility. 60 Months Warranty AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 27: General Safety Warnings
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 28 Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 29 If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 30 Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 31 Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 32 Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 33: Important Information - Product Care
6. Important information – Product care NOTE: For any issuses related directly to your purchased ALDI Xfinity Battery / charger, contact the Customer Service of the manufacturer as listed on the battery / charger packaging, manual or on the label on the battery / charger.
Page 34: Assembly
To Install the Battery Pack (7) (See Fig. A2) Slide the fully charged battery pack (7) onto the drill / driver with sufficient force until it clicks into position. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 35: Operation
(10), push the forward/reverse rotating control (4) into the center position.In this position, the trigger switch (10) cannot be activated. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 36 (3) towards the chuck.The number “2” will be displayed. Gear 1 Low speed range: for screwdriving or working with large drilling diameter AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 37 To remove the drill/driver bit, rotate sharply the chuck in an anticlockwise direction, sufficiently enough to allow the drill/driver bit to be removed. CLOSE OPEN AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 38 10 - 14 for driving screws into soft and hard material 15 - 19 for driving screws into hard wood 20 - 21 for driving larger screws for heavy drilling AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 39 To turn on the LED light (9), press the trigger switch (10). When you release the trigger switch (10), the LED light (9) will turn off.LED lighting (9) increases visibility-great for dark or enclosed areas. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 40 When drilling in metal, only use HSS drill bits in good condition. Always use a magnetic bit holder when using short screwdriver bits (These bits not included). AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 41 (with charge) will lead to drill/ driver restarting and then stopping again, after only a few seconds of operation. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 42: Maintenance
The ambient temperature range for tool and battery use and C-45 storage is 0 The recommended ambient temperature range for the charging system during charging is 0 C-40 AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 43: Warranty
Use only WORKZONE TITANIUM replacement parts for your ® product. Non-conforming parts or modifications made to parts will void your warranty. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 44: Environmental Protection
Service Support If you have any issues with the operation of your product, please call us on 1300 889 028 for advice, or email us at info.aldi@positecgroup.com 11.Environmental protection Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way.
Page 45: Drill/Driver
Controlling the torque allows for better control when using the drill / driver on specific screwing tasks and assists in preventing over- fastening and over-tightening. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 46 8. WHAT DO I DO IF I HAVE AN ISSUE WITH MY DRILL? If you have any issues with your drill / driver, please contact our Customer Service line on 1300 889 028. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 47: Technical Specifications
Product Dimensions (L x W x H): 190x75x225 mm This 20V Li-ion Cordless Drill / Driver complies with the following Standards: EN62841-1 EN62841-2-1 AS/NZS62841-1 AS/NZS62841-2-1 EMC: EN55014-1 EN55014-2 AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CDT218XA.9 • 2323 • 05/2019...
Page 48: Impact Driver
Xfinity Li-ION 20V Impact Driver Instruction Manual IMPORTANT MODEL NUMBER CID180XA.9 Read carefully before use Version number: 004 Keep for future reference...
Page 49 Failure to do so could result in serious personal injury. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 50 20V Li-Ion Cordless Impact driver Warranty Details REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the date of purchase.
Page 51 Package Content List Parts description Description of symbols General Safety Warnings Important information – Product care Assembly Operation Maintenance Warranty Environmental protection FAQ/Troubleshooting Technical Specifications AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 52: Package Content List
WARNING! To reduce risk of injury, only use the supplied 20V Li- Ion battery and charger included in this kit or any 20V Li-Ion ALDI Xfinity Plus range of 20V Li-Ion battery packs. Other type of battery packs may burst causing personal injury and damage.
Page 53: Parts Description
3. Parts description Forward/Reverse Selector Battery Pack Trigger Switch Battery Pack Release Button Soft Grip Handle LED light Belt Clip Hex Drive AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 54: Description Of Symbols
Warning Wear ear protection Wear eye protection Wear breathing protection Conforms to relevant standards for electrical safety and electromagnetic compatibility. 60 Months Warranty AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 55: General Safety Warnings
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 56 Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 57 If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 58 Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 59 Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 60: Important Information - Product Care
Use only the batteries and charger included with this kit, or any ALDI Xfinity Plus 20V Li-Ion range of batteries and chargers. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com...
Page 61: Assembly
(See Fig. B) Pull the hex drive (8) sleeve (a) forward. Remove the bit out of the hex drive (8) and release the sleeve (a). AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 62 To Install The Battery Pack (5) (See Fig. C2) Slide the fully charged battery pack (5) onto the tool with sufficient force until it clicks into position. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 63: Operation
WARNING: Never change the direction of rotation when the chuck is rotating, wait until it has stopped! AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 64 (2), the LED light (7) will turn off.LED lighting (7) increases visibility - great for dark or enclosed areas. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 65 To reduce the temperature of the cells remove the battery pack from the Impact Driver and place the battery pack in a free air AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 66 (with charge) will lead to Impact Driver restarting and then stopping again, after only a few seconds of operation. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 67: Maintenance
The ambient temperature range for tool and battery use and C-45 storage is 0 The recommended ambient temperature range for the charging system during charging is 0 C-40 AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 68: Warranty
Use only WORKZONE TITANIUM replacement parts for your ® product. Non-conforming parts or modifications made to parts will void your warranty. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 69: Environmental Protection
Service Support If you have any issues with the operation of your product, please call us on 1300 889 028 for advice, or email us at info.aldi@positecgroup.com 11.Environmental protection Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way.
Page 70: Faq/Troubleshooting
4. WHAT DO I DO IF I HAVE AN ISSUE WITH MY DRIVER? If you have any issues with your driver, please contact our Customer Service line on 1300 889 028. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 71: Technical Specifications
Product Dimensions (L x W x H): 155x80x225 mm This 20V Li-ion Cordless Impact Driver complies with the following Standards: Safety: EN62841-1 EN62841-2-2 AS/NZS62841.1 AS/NZS62841.2.2 EMC: EN55014-1 EN55014-2 AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CID180XA.9 • 2323 • 05/2019...
Page 72 Xfinity Li-ION 20V 165mm Circular Saw Instruction Manual IMPORTANT MODEL NUMBER CSC165XA.9 Read carefully before use Version number: 004 Keep for future reference...
Page 73 Failure to do so could result in serious personal injury. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 74 20V Li-Ion 165mm Cordless Circular Saw Warranty Details REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the date of purchase.
Page 75 Description of symbols Product Safety Safety instructions for all saws Important information – Product care Assembly Operation Maintenance Warranty Environmental protection FAQ/Troubleshooting Technical Specifications AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 76: Application
Your product should only be passed on together with this instruction manual. WARNING! To reduce risk of injury, only use the ALDI Xfinity Plus range of 20V Li-Ion battery packs. Other type of battery packs may burst causing personal injury and damage.
Page 77: Parts Description
23. Cutting Depth Lock Knob (See Fig. C) 24. Hex key (See Fig. K) 25. Blade rotation indicator 26. Main handle 27. Spindle 28. Parallel guide notches AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 78 AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 79: Description Of Symbols
Conforms to relevant standards for electrical safety and electromagnetic compatibility. 60 Months Warranty Wear protective gloves when handling the saw blade. The blade has sharp edges. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 80: Product Safety
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 81 This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 82 If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 83 Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 84: Safety Instructions For All Saws
Hold the power tool by insulated gripping surfaces only, when performing an operation where the cutting tool AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 85 Kickback could cause the saw to jump backwards, but AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 86 Never clamp or tie the lower guard into the open position. If saw is accidentally dropped, lower guard may be bent. Raise the lower guard with the retracting AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 87: Circular Saw
Care MUST be taken to ensure both the safety and life of the pack is maintained. Ensure you have read all of the safety notes in the AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 88: Assembly
7.2 To install the battery pack (See Fig. A2) Slide the fully charged battery pack (16) onto the tool with sufficient force until it clicks into position. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 89: Operation
Loosen the blade bolt (21) in a clockwise direction using the supplied hex key (24). Remove the outer flange (20). Using the lower AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 90 (23) in a clockwise direction to lock. Always add 3mm to your depth of cut so that the blade can cut through the material. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 91 Directly connect a suitable vacuum hose to the adapter. NOTE: There is an arrow on the surface of the adapter which shows which direction to tighten on the hose. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 92 45º bevel cut, use the 45º cutting mark (8) to align the the parallel guide scale. Always make a trial cut to check the setting. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 93 Set the required bevel angle between 0° and 45°. Do not use the depth of cut scale when making bevel cuts due to possible inaccuracy. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 94: Maintenance
It has been manufactured under stringent WORKZONE TITANIUM ® Quality Standards to meet superior performance criteria. You will find your new 20V Li-Ion 165mm Circular Saw easy and safe AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 95: Environmental Protection
After Sales Support TEL: 1300 889 028 AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 96: Faq/Troubleshooting
Service Support If you have any issues with the operation of your product, please call us on 1300 889 028 for advice, or email us at info.aldi@positecgroup.com Accessories and After Sales Parts The following is available for purchase by visiting https://help.tools/ or calling our customer service hotline on: 1300 889 028 1.
Page 97 Blade kicks back Blade is not spinning fast reach full speed prior to when beginning a enough. beginning a cut in the cut. material. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 98 Check the workpiece. machine. forward. For further inquiries or issues associated with your tool, call our Customer Service on 1300 889 028 or email us at info. aldi@positecgroup.com AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.:...
Page 99 Product Dimensions (L x W x H) This 20V 165mm Circular Saw complies with the following Standards: Safety: EN62841-1 EN62841-2-5 AS/NZS62841.1 AS/NZS62841.2.5 EMC: EN55014-1 EN55014-2 AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CSC165XA.9 • 2323 • 05/2019...
Page 100 Xfinity Li-ION 20V Cordless Sander Instruction Manual IMPORTANT MODEL NUMBER CPS18WA.9 Read carefully before use Version number: 004 Keep for future reference...
Page 101 Failure to do so could result in serious personal injury. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CPS18WA.9 • 2323 • 05/2019...
Page 102 20V Li-Ion Cordless Detail Sander Warranty Details REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the date of purchase.
Page 103 Product Safety Important information – Product care Assembly Operation Maintenance Warranty Environmental protection Accessories and after sales parts Frequently Asked Questions Troubleshooting Technical Specifications AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CPS18WA.9 • 2323 • 05/2019...
Page 104: Application
WARNING! To reduce risk of injury, only use the supplied 20V Li-Ion battery or charger or any ALDI Xfinity Plus 20V Li-Ion battery packs. Other type of battery packs may burst causing personal injury and damage.
Page 105: Parts Description
(60G/80G/120G ) Detail sanding plate 11. 3 x Finger sanding paper Base locking lever (60G/80G/120G) SDS Finger pad 12. Battery pack release button AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CPS18WA.9 • 2323 • 05/2019...
Page 106: Description Of Symbols
Warning Wear ear protection Wear eye protection Wear breathing protection Conforms to relevant standards for electrical safety and electromagnetic compatibility. 60 Months Warranty AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CPS18WA.9 • 2323 • 05/2019...
Page 107: Product Safety
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CPS18WA.9 • 2323 • 05/2019...
Page 108 This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CPS18WA.9 • 2323 • 05/2019...
Page 109 If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CPS18WA.9 • 2323 • 05/2019...
Page 110 Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CPS18WA.9 • 2323 • 05/2019...
Page 111: Detail Sander
STOP using the battery pack and have it checked. Use only the batteries and charger included with this kit, or any ALDI 20V Li-Ion Xfinity Plus batteries and chargers. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com...
Page 112: Assembly
(4) into the dust bag port (8) fully until the dust bag (4) is securely in place. WARNING: To prevent the possibility of sanding dust or foreign body being thrown into your face or eyes, never AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CPS18WA.9 • 2323 • 05/2019...
Page 113 2) Pull the SDS finger pad (7) out. 3) To re-secure the SDS finger pad (7) in position, push the base locking lever (6) down until secure. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CPS18WA.9 • 2323 • 05/2019...
Page 114 7.7 To remove the battery pack (See Fig. E2) Depress the battery pack release button (12) firmly, then slide the battery pack (3) out and away from the sander. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CPS18WA.9 • 2323 • 05/2019...
Page 115: Operation
8.2. Flush sanding facility (See Fig. G) Your sander can sand flush on three sides of the sanding plate which allows easy access to corners and edges. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CPS18WA.9 • 2323 • 05/2019...
Page 116: Maintenance
Keep all working controls free of dust. Occasionally you may see sparks through the ventilation slots. This is normal and will not damage your power tool. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CPS18WA.9 • 2323 • 05/2019...
Page 117: Warranty
Use only WORKZONE TITANIUM replacement parts for your product. ® Non-conforming parts or modifications made to parts will void your warranty. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CPS18WA.9 • 2323 • 05/2019...
Page 118: Environmental Protection
Service Support If you have any issues with the operation of your product, please call us on 1300 889 028 for advice, or email us at info.aldi@positecgroup.com 11. Environmental protection Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way.
Page 119: Frequently Asked Questions
• Sand hard-to-reach places using the SDS finger pad (7). • Check and empty the dust bag (4) at regular intervals. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CPS18WA.9 • 2323 • 05/2019...
Page 120: Troubleshooting
Low sanding efficiency. Change to a The density of grit of the sanding paper with sanding paper is too high. lower grit. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CPS18WA.9 • 2323 • 05/2019...
Page 121: Technical Specifications
This 20V Li-ion Cordless Detail Sander complies with the following Standards: Safety: IEC 62841-1 IEC 62841-2-4 AS/NZS 62841.1 AS/NZS 62841.2.4 EMC: EN 55014-1 EN 55014-2 AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CPS18WA.9 • 2323 • 05/2019...
Page 122 Xfinity Li-ION 20V Cordless LED Torch Instruction Manual IMPORTANT MODEL NUMBER CLP18WA.9 Read carefully before use Version number: 004 Keep for future reference...
Page 123 Failure to do so could result in serious personal injury. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CLP18WA.9 • 2323 • 05/2019...
Page 124 20V Li-Ion Cordless LED torch Warranty Details REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the date of purchase.
Page 125 Package Content List Parts description Description of symbols General safety warnings Important information-Product care Assembly Operation Maintenance Warranty Environmental protection FAQ/Troubleshooting Technical Specifications AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CLP18WA.9 • 2323 • 05/2019...
Page 126: Package Content List
20V Li-Ion Xfinity Plus batteries. Other type of battery packs may burst causing personal injury and damage. The battery pack must be recharged only with the supplied 20V Li-Ion charger, or any ALDI 20V Li-Ion Xfinity Plus charger. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com...
Page 127: Parts Description
LED light Belt clip retainer Torch head Battery pack release button Pivot joint Battery Pack ON/OFF Switch Hanging hook Handle 10. Belt clip AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CLP18WA.9 • 2323 • 05/2019...
Page 128: Description Of Symbols
Do not stare at the operating light source 60 Months Warranty Replace any cracked protective shield Regulatory Compliance Mark. Appliance complies with requirements of electrical approval & EMC in Australia. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CLP18WA.9 • 2323 • 05/2019...
Page 129: General Safety Warnings
They may explode. Also, do not dispose of a worn out battery pack by incineration, even if it is severely damaged or AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CLP18WA.9 • 2323 • 05/2019...
Page 130 11. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CLP18WA.9 • 2323 • 05/2019...
Page 131: Important Information-Product Care
Note: a) Do not use any charger other than that specifically provided for use with the equipment, or any 20V Li-Ion ALDI Xfinity Plus Batteries. b) If the battery pack (8) is very hot, remove the battery pack (8) from the charger and allow time for the battery to cool down before recharging.
Page 132: Operation
Press the on/off switch (4) to turn on the LED Torch. (See Fig. B) Press the on/off switch (4) again to turn OFF the LED Torch. (See Fig. ON/OFF Switch AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CLP18WA.9 • 2323 • 05/2019...
Page 133 The torch may be carried or hung by the hanging hook (9) (See Fig. D1). When not in use, the hanging hook (9) may be folded down (See Fig. D2). AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CLP18WA.9 • 2323 • 05/2019...
Page 134: Led Torch
IMPORTANT: When attaching or replacing the belt clip (10), use only the assembly screw that is provided. Be sure to securely tighten screw. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CLP18WA.9 • 2323 • 05/2019...
Page 135: Maintenance
The ambient temperature range for the use and storage of tool and battery is 0°C-45°C. The recommended ambient temperature range for the charging system during charging is 0°C-40°C. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CLP18WA.9 • 2323 • 05/2019...
Page 136: Warranty
20V Li-Ion Cordless LED Torch, making it easy to maintain and operate. Use only WORKZONE TITANIUM replacement parts for your ® product. Non-conforming parts or modifications made to parts will void your warranty. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CLP18WA.9 • 2323 • 05/2019...
Page 137: Environmental Protection
Service Support If you have any issues with the operation of your product, please call us on 1300 889 028 for advice, or email us at info.aldi@positecgroup.com 11.Environmental protection Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way.
Page 138: Faq/Troubleshooting
This is normal charging batteries during the charging process Undiagnosable The tool needs to be Contact Customer fault repaired Service AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CLP18WA.9 • 2323 • 05/2019...
Page 139: Technical Specifications
This 20V Li-ion Cordless LED torch complies with the following Standards: Safety: EN 60598-1 EN 60598-2-4 EN 62493 AS/NZS 60598.1 AS/NZS 60598.2.4 EMC: EN 55015 EN 61547 EN 61000-3-2 EN 61000-3-3 AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: CLP18WA.9 • 2323 • 05/2019...
Page 140: Bluetooth Speaker
Xfinity Li-ION 20V Bluetooth Speaker Instruction Manual IMPORTANT MODEL NUMBER TRD18SA.9 Read carefully before use Version number: 004 Keep for future reference...
Page 141 Failure to do so could result in serious personal injury. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: TRD18SA.9 • 2323 • 05/2019...
Page 142 20V Li-Ion Bluetooth Speaker Warranty Details REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion.
Page 143 Package Content List Parts description Description of symbols General Safety Warnings Important information – Product care Assembly Operation Maintenance Warranty Environmental protection FAQ/Troubleshooting Technical Specifications AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: TRD18SA.9 • 2323 • 05/2019...
Page 144: Package Content List
WARNING! To reduce risk of injury, only use the supplied 20V Li-Ion battery or charger or any ALDI Xfinity Plus range of 20V Li-Ion battery packs. Other type of battery packs may burst causing personal injury and damage.
Page 145: Parts Description
AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: TRD18SA.9 • 2323 • 05/2019...
Page 146: Description Of Symbols
CAUTION: To prevent electric shock hazard, do not connect to mains power supply while grille is removed. Electric shock Conforms to relevant standards for electrical safety and electromagnetic compatibility. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: TRD18SA.9 • 2323 • 05/2019...
Page 147: General Safety Warnings
9) The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. CAUTION: Danger of explosion if a non specified battery is used on this product. Use only the supplied 20V Li-Ion battery or any ALDI Xfinity Plus 20V Li-Ion batteries. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com...
Page 148: Important Information - Product Care
Use only the supplied 20V Li-Ion battery and charger or any ALDI Xfinity Plus 20V range of batteries and chargers. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com...
Page 149: Assembly
7.2 To Install the Battery Pack (See Fig. A2) Slide the fully charged battery pack (2) onto the bluetooth speaker with sufficient force until it clicks into position. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: TRD18SA.9 • 2323 • 05/2019...
Page 150: Operation
3. Once the bluetooth speaker (1) is connected to your device and playing music, the power indicator light (6) will remain constant and will not be flashing. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: TRD18SA.9 • 2323 • 05/2019...
Page 151 3. By pressing the left volume button (5) for approx. 3 seconds will return to the previous song. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: TRD18SA.9 • 2323 • 05/2019...
Page 152: Maintenance
The ambient temperature range for the use and storage of tool and battery is 0°C-45°C. The recommended ambient temperature range for the charging system during charging is 0°C-40°C. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: TRD18SA.9 • 2323 • 05/2019...
Page 153: Warranty
Use only WORKZONE TITANIUM replacement parts for your ® product. Non-conforming parts or modifications made to parts will void your warranty. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: TRD18SA.9 • 2323 • 05/2019...
Page 154: Environmental Protection
After Sales Support TEL: 1300 889 028 Service Support If you have any issues with the operation of your product, please call us on 1300 889 028 for advice, or email us at info.aldi@positecgroup.com 11.Environmental protection Recycle unwanted materials instead of disposing of them as waste.
Page 155: Faq/Troubleshooting
Defective battery. Service, or the battery manufacturer. For further inquiries or issues associated with your tool, call our Customer Service on 1300 889 028 or email us at info.aldi@positecgroup.com AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.:...
Page 156: Technical Specifications
AS/NZS 60065 EMC: EN55032 EN55035 EN 61000-3-2 EN 61000-3-3 EMF: EN 50663 EN 62479 RED: EN 300 328 EN 301 489-1 EN 301 489-17 AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: TRD18SA.9 • 2323 • 05/2019...
Page 157: Usb Charger
Xfinity Li-ION 20V USB CHARGER Instruction Manual IMPORTANT MODEL NUMBER ACG118PA Read carefully before use Version number: 004 Keep for future reference...
Page 158 Failure to do so could result in serious personal injury. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: ACG118PA • 2323 • 05/2019...
Page 159 Package Content List Parts description Description of symbols General safety warnings Important information – Product care Operation Maintenance Warranty Environmental protection FAQ/Troubleshooting Technical Specifications AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: ACG118PA • 2323 • 05/2019...
Page 160: Package Content List
WARNING! To reduce risk of injury, only use the supplied battery and charger in this kit or any ALDI Xfinity Plus range of 20V battery packs. Other type of battery packs may burst causing personal injury and damage.
Page 161: Parts Description
3. Parts description Charging turn on button Charger base USB charging ports Battery pack Battery power indicator Battery pack release button AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: ACG118PA • 2323 • 05/2019...
Page 162: Description Of Symbols
For indoor use only Read the operator’s manual. Conforms to relevant standards for electrical safety and electromagnetic compatibility. 60 Months Warranty T 2A Fuse AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: ACG118PA • 2323 • 05/2019...
Page 163: General Safety Warnings
9. Longer life and better performance can be obtained if your equipment is charged when the air temperature is between 15 and 25 C. Do not charge your equipment in air temperatures AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: ACG118PA • 2323 • 05/2019...
Page 164: Important Information - Product Care
7.2. USB Charging Ports (6) The USB charger is equipped with 2 USB charging ports (3) and delivers 2.0 A total current per USB port. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: ACG118PA • 2323 • 05/2019...
Page 165: Warranty
You will find your new 20V Li-Ion USB Charger easy and safe to operate, and, with proper care, it will give you many years of dependable service. CAUTION. Carefully read through this entire instruction manual AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: ACG118PA • 2323 • 05/2019...
Page 166: Environmental Protection
After Sales Support TEL: 1300 889 028 Service Support If you have any issues with the operation of your product, please call us on 1300 889 028 for advice, or email us at info.aldi@positecgroup.com AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.:...
Page 167: Faq/Troubleshooting
USB charger. For further inquiries or issues associated with your tool, call our Customer Service on 1300 889 028 or email us at info.aldi@positecgroup.com 12. Technical Specifications Input 20V d.c. 1.5Ah...
Page 168 If you are not entirely satisfied with this product, please return it to your nearest ALDI store within 60 days from the date of purchase for a full refund or replacement, or take advantage of our after sales support by calling the supplier‘s Customer Service Hotline.

This manual is also suitable for:

Csc165xa.9 Cps18wa.9 Clp18wa.9 Trd18sa.9 Jlh122200370s Z10 ... Show all

ALDI Workzone Titanium Xfinity Series Instruction Manual

The Contents of All Instruction Manual

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Quick Links

Chapters

Troubleshooting

Need help?

Questions and answers

Related Manuals for ALDI Workzone Titanium Xfinity Series

Summary of Contents for ALDI Workzone Titanium Xfinity Series

This manual is also suitable for:

Table of Contents