Table of Contents
Advertisement
Registering a Remote Party
Deleting Registered Entries
Duplicating the Setting of the Phone Book Menu
Notes on Registration
64
Chapter 2 Basic Operation During a Meeting
3
Modify the entry.
4
Select Save with the joystick on the Remote Commander, then press
the joystick.
The entry is modified.
You can delete a registered entry as follows.
1
Select the Index title to be deleted with the joystick on the Remote
Commander.
2
Select Delete with the joystick on the Remote Commander, then press
the joystick.
The selected Index entry is deleted.
1
Select the index to be copied with the joystick on the Remote
Commander, then press the joystick.
2
Select Copy with the joystick on the Remote Commander, then press
the joystick.
The index is duplicated, and "XXXX-2" appears in the Index box.
Since the setting has been duplicated, you can use it with a little
modification.
General note
If the Restrict setting of the remote party is set to 56K in the Answer Setup
menu, the connection will be made at 56 Kbps even if you set Restrict to
Auto in the Dial Setup menu.
Note on the optional PCS-I600 BRI Board
If you have installed the multiple PCS-I600 BRI Boards, you can use
twelve ISDN lines (up to 24B channels). In this case, register second
telephone number downward in the boxes B1/B2 or downward, you can
connect with up to 6B channels. When you connect with 8B channels or
more, the connection uses the bonding interface. In this case, register the
telephone number only in the box A1. The connection is up to 24B
channels according to the number of channels set in Number of Lines.
When you install the PCS-I601 PRI Board and set Line I/F to PRI, the
connection via 8B-channel or more is the Bonding connection.
Advertisement
Table of Contents
