At+Icf Set Te-Ta Control Character Framing; At+Ifc Set Te-Ta Local Data Flow Control - SimCom SIM7000 Series At Command Manual

2.2.30 AT+ICF Set TE-TA Control Character Framing

AT+ICF Set TE-TA Control Character Framing
Test Command Response
AT+ICF=? +ICF: (list of supported <format>s),(list of supported <parity>s)
OK
Parameters
See Write Command
Read Command Response
AT+ICF? +ICF: <format>,<parity>
OK
Parameters
See Write Command
Write Command Response
AT+ICF=<forma This parameter setting determines the serial interface character framing
t>[,<parity>] format and parity received by TA from TE.
OK
Parameters
<format>
<parity>
Parameter Saving -
Mode
Max Response -
Time
Reference Note
V.25ter The Command is applied for Command state;
In <format> parameter, "0 parity" means no parity;
The <parity> field is ignored if the <format> field specifies no parity and
string "+ICF: <format>,255" will be response to "AT+ICF?" Command.
2.2.31 AT+IFC Set TE-TA Local Data Flow Contro
AT+IFC Set TE-TA Local Data Flow Contro
SIM7000 Series_AT Command Manual_V1.03
1 8 data 0 parity 2 stop
2 8 data 1 parity 1 stop
3 8 data 0 parity 1 stop
4 7 data 0 parity 2 stop
5 7 data 1 parity 1 stop
6 7 data 0 parity 1 stop
0 odd
1 even
3 space (0)
l
l
34
Smart Machine Smart Decision
2018-05-08