product introduction
FEATURES
This product is an elegant-looking proximity reader which has the maximum read range of 10cm (4"), can be easily
installed on a metal doorframe or the wall. Basically, both SSA-R1001 and SSA-R1101 use the same module with
epoxy molding, which guarantees operation in any weather and environment condition. The two different bezels of
two models are compatible with each other, meaning one can be replaced with the other according to the wall
condition or the applicable situation. With its 3 two-color LED indicators as well as the built-in buzzer, this product is
guaranteed to operate stably and correctly.
◆
13.56 MHz [MIFARE] Contactless Smart Card Reader
◆
Compatible with ISO14443 Type A
◆
3 Array LED Indicators (red and green) and Built-in Buzzer
◆
34 bit Wiegand
◆
Control of External LED Indicators
◆
Control of External Buzzer
◆
Epoxy Molding
◆
Reverse Polarity Protection
◆
Weatherproof
WHAT'S INCLUDED
Check if the following items are included in the product package.
What's included in SSA-R1001
SSA-R1001
Bezel
What's included in SSA-R1101
SSA-R1101
Bezel
3.5x40mm screws (x2)
READER Module
3.5x25mm screws (x2)
6x30mm Plastic Anchor (x2)
3.5x40mm screws (x2)
READER Module
3.5x25mm screws (x2)
6x30mm Plastic Anchor (x2)
Quick Guide
CD Manual
Quick Guide
CD Manual
English5