SEA Saturn 600 Mounting And Connecting Instructions

Sistemi elettronici
di Aperture Porte e Cancelli
SATURN is a motor reducer designed for the automation of
sliding gates with grease lubrication of the gear in the 600
version; in oil bath in the 1000 and 2000 versions.
The irreversibility of the motor reducer allows a perfect and safe
gate closing, and makes the installation of an elecric lock
unneccessary. In case of electric power cut, the lock device
placed on the front part of the motor reducer allows the manual
opening and closing. The operator is equipped with an electronic
clutch device in the 600 version and with an adjustable
mechanical clutch in the 1000 and 2000 versions, which
guaranties a thrust adjustment on the gate, furthermore the
electronic inversion system (optional) through encoder
makes out of the Saturn motor reducer a safe and reliable
operator allowing in a simple way to respect the laws in force in
the country where the product will be installed.
MAIN PARTS DENOMINATION
1 Adjustable foundation plate
2 Anchor bolts
3 Pinion protection
4 Adjusting screws cover
5 Pinion
6 Reducer release lever
8 8
6 6
4 4
2 2
TECHNICAL DATA
Power supply
Power
Absorbed current
Motor capacitor
Working frequency
Working Temperature
Thermoprotection
Weight
Anticrushing clutch
Protection degree
Pinion Z16 (Z20) speed
Maximum torque
Gate maximum weight
Mechanical clutch
nductive or mechanical limit switch
I
cod. 67410326
SATURN
MOUNTING AND CONNECTING INSTRUCTIONS
7
Screw for mechanical clutch adjustment
(only in 1000 and 2000 models)
8 Electronic unit
9 Oil filling up cap
10 Magnetic encoder
9 9
3 3
1 1
600 1000
230 V (±5%) 50/60 Hz
330W 550W
1,6 A 2,6 A
16 uf 12,5 uf
35% 35%
-20°C +55°C
150°C
12 Kg 13 Kg
Electronic Electronic/Mechanical
IP55
9,5 (11) m/min
30 Nm 55 Nm
600 Kg 1000 Kg
no
with or without
600 - 1000 - 2000
SATURN MOTOR REDUCER USING GRAPHIC
2000 Kg
1800 Kg
1000 Kg
600 Kg
25%
30%
35%
10 10
40%
50%
7 7
DIMENSIONS (mm)
5 5
320
2000
750W
1. GATE ARRANGEMENT
3,0 A
Before starting with the installation check if all the gate parts
25 uf
(fixed and mobile) have a strong and as less as possible
30%
deformable structure, also make sure that :
a) The leaf is rigid and compact;
b) The inferior slideway is perfectly straight, horizontal and
14,5 Kg
without any obstacles which could obstruct the gate sliding;
c) The inferior sliding wheels are equipped with greasable or
water tightened bearings;
d) The superior slideway has been produced and placed so that
70 Nm
the gate is in a perfect vertical position;
2000 Kg
e) Mechanical stops of the leaf are always installed in order to
yes avoid possible derailment of it.
REV 00 - 04/2007
ENGLISH
Motor reducers
1/30