Siemens SIMATIC IFP Basic Series Operating Instructions Manual page 37

Tool and driver list
The tool and driver need to be installed on the PC:
● Brightness Adjustment Tool
● Touch Driver
To open the list
1. Put the
2. Double-click My Computer → Documentation and Drivers to open the DVD.
3. Double-click index.htm.
4. Click Driver and Tool to open the driver list.
The available driver list opened.
Alternative way to access the drivers
You can also find the drivers in the DRIVER folder of the
Below is an example path.
E:\DRIVER
Step 1: install Brightness Adjustment Tool
1. Click Brightness Adjustment Tool.
2. Click
3. Click Next to continue.
4. Click Install to allow the computer to start the installation.
The installation starts.
5. Click Finish.
The Brightness Adjustment Tool installation is completed.
Prerequisites for installing the touch driver
● Make sure you connect the IFP basic to the computer with touch cable before your
installing the driver.
● If you use Windows Embedded standard 7 or Windows 7, make sure you have the
Windows patch KB3033929 installed first.
You can find the drivers in the path "\DRIVER\KB3033929" of the
Drivers
IFP Basic
Operating Instructions, 03/2019, A5E46178354 - AB
Documentation and Drivers
to install the Tool.
DVD.
Installing and connecting the device
3.4 Installing the tool and driver
DVD into the DVD drive.
Documentation and Drivers
DVD.
Documentation and
37