Using The Mpa V L; Connecting To A Bodypack Transmitter - AKG C411 Series User Instructions

INTERFAcINg

3.2.3 Using the MPA V L

C411 L
III
Using the MPA V L

3.2.4 Connecting to a Bodypack Transmitter

Connecting to
a Bodypack
Transmitter
26
Mini XLR
MPA Phantom
3 4
Figure 4: Connection diagram with MPA V L.
Connecting the cable:
1)
Push the mini XLR connector (1) on the pickup cable into the
mini XLR socket (2) on the cable of the MPA V L (3) to the
stop.
The connector will lock automatically.
Disconnecting the cable: refer to section 3.2.1.
2) Connect the MPA V L (3) to a balanced XLR microphone input
with phantom power.
3) Switch the phantom power on. (Refer to the instruction manu-
al of the unit to which you connected your pickup.)
If your mixer provides no phantom power: Connect the
4)
MPA V L (3) to an optional AKG phantom power supply (4) and
use an XLR cable (5) to connect the phantom power supply (4)
to the desired balanced input.
Refer to the manual of your bodypack transmitter.
Mini XLR
1 2
5
2
3
1
MPA
MIC 1 MIC 2 MIC 3
3
2
3
1
C411 MANUAL
III
MIC 4