User Set Function - Yamato SM520 Instruction Manual

User set function

4. Operation Method
When the equipmet is power on, at normal standby or
operation state, this function is available!
1. Standby interface after the last operation ends
Press ＊ Set key, switch over to user set mode
interface 1.
2.1 User set mode interface 1
Press to return to initial standby interface, switch
over to standby or operation interface. Press▲▼ for page
turning.
Page content: Language (Chin, Eng and Jpn)
Calendar (calendar change)
Time (time change)
Key lock (lock the operation keys on operation
interface except Set Help)
Mode edit lock (mode edit lock of memory
interface)
2.2 User set mode interface 2
Page content: CO consumption conversion factor
2
Buzzer set (ON/OFF)
Time set (time change)
Sample temp. sensor (ON/OFF)
Low analog scale setting 4mA
High analog scale setting 20mA
2.3 User set mode interface 3
Page content: Remote comm. ID
Remote comm. protocol
Remote comm. speed
Reply delay time
Parity
2.4 User set mode interface 4
Page content: Data length
Stop bit length
Preheat temp.
Forced cooling
End temp.
23
User Set Function
temp. set
temp. set