Download
Share
Print this page
Bayer HealthCare Medrad Spectris Solaris EP Quick Tips
  1. Manuals
  2. Brands
  3. Bayer HealthCare Manuals
  4. Medical Equipment
  5. Medrad Spectris Solaris EP
  6. Quick tips

Bayer HealthCare Medrad Spectris Solaris EP Quick Tips

Mr injection system
Hide thumbs

Advertisement

Quick Links

Download this manual
QuickTips

Advertisement

loading
Need help?

Need help?

Do you have a question about the Medrad Spectris Solaris EP and is the answer not in the manual?

Questions and answers

Related Manuals for Bayer HealthCare Medrad Spectris Solaris EP

Summary of Contents for Bayer HealthCare Medrad Spectris Solaris EP

  • Page 1 QuickTips...

  • Page 3: Powering Up And Down

    The following information is intended to be a quick summary of operating instructions for your Medrad® Spectris Solaris® EP Injection System and does not constitute a substitute for the full and complete instructions within the Medrad® Spectris Solaris® EP Operations Manual, Medrad Document Number 202974 or Mobile Manual: 205580.

  • Page 4: Loading Syringes

    Loading Syringes 1. Position injector head in upright position 2. Ensure pistons are fully retracted a. To retract pistons, press the Enable button, Press the Reverse Load switches on the injector head. The pistons will stop when fully retracted 3. Remove new syringe from package and insert it into the injector ensuring that keyed wings at syringe base are aligned a.
  • Page 5 Loading Syringes (continued) 7. Remove the filling device 8. Securely attach the “T” portion of the connector tubing to syringes a. The shorter part of the “T” connection with back check valve attaches to the “A” syringe (contrast) b. The longer part of the “T” connects to the “B” syringe (flush) 9.
  • Page 6 Programming Add or Change a Phase: 1. Press the delta key to the left of the flow rate 2. Select the appropriate phase type 3. Enter in the appropiate values Flow Rate: 1. Touch the corresponding box 2. Enter the desired flow rate using the keypad 3.
  • Page 7 Programming (continued) Pressure Limit: 1. Touch Set on Pressure Limit field 2. From drop down list, select the appropriate psi from 100-325 Medrad® Spectris Solaris® EP QuickTips...
  • Page 8 KVO and Arming Injector Independent KVO (Keep Vein Open) 1. Ensure that no air is in the syringe or fluid path 2. Press the Air Confirmation button on injector head or acknowledge on the DCU that air has been removed 3.
  • Page 9 Storing and Recalling Protocols: Store Recall Storing of Protocol: 1. Display desired protocol on screen by setting Flow Rates, Volumes, and delay rates, if applicable 2. Touch Store button 3. Type in desired protocol name using the keyboard 4. Touch enter. Protocol has now been stored Medrad®...
  • Page 10 Storing and Recalling Protocols: (continued) Recalling Protocols: 1. Press recall Select protocol by pressing the name of desired protocol Protocol will be displayed in center screen 2. Press OK to recall Protocol will be displayed on main screen 3. The pressure limit is changed to the stored protocol pressure limit value Injection History: 1.
  • Page 11 Resetting the iCBC: 1. Switch the DCU off and unplug it 2. Remove the battery from the Scan Room Unit 3. Unplug the iCBC from the wall outlet or remove the power plug at the iCBC box 4. Insert the battery into the Scan Room Unit 5.
  • Page 12 One Medrad Drive form mechanical or electronic (including photocopying, tape recording, microcopying) or stored in a Indianola, PA 15051-0780 USA data carrier or computer system without written consent of Bayer HealthCare. Customer Service Fax Telephone: +1-412-767-2400 Bayer, the Bayer Cross, Medrad® and Spectris Solaris® are trademarks of the Bayer group of...