Backyard Discovery OAKMONT Owner's Manual
  1. Manuals
  2. Brands
  3. Backyard Discovery Manuals
  4. Play Sets & Playground Equipment
  5. OAKMONT
  6. Owner's manual

Backyard Discovery OAKMONT Owner's Manual

Wooden swing set
Hide thumbs
Table of Contents

Advertisement

Quick Links

OAKMONT
Wooden Swing Set
• Owner's Manual
• Frequently Asked Questions
• Assembly Instructions
• Warranty Information
Features the
Save this assembly manual for future reference in the event that
you need to order replacement parts.
Model: #65114
Free BILT Intelligent Instructions
Download on https://biltapp.com/
Available on Apple and Google Play
fastening system.
Made in China

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OAKMONT and is the answer not in the manual?

Questions and answers

Related Manuals for Backyard Discovery OAKMONT

Summary of Contents for Backyard Discovery OAKMONT

  • Page 1 OAKMONT Wooden Swing Set Model: #65114 • Owner's Manual • Frequently Asked Questions • Assembly Instructions • Warranty Information Features the fastening system. Save this assembly manual for future reference in the event that you need to order replacement parts.
  • Page 2 GENERAL SAFETY INSTRUCTIONS PURPOSE This product is intended for outdoor, domestic use only. It is not suitable for commercial or medical use. DANGER FOR CHILDREN  WARNING! No eating while using the product  This product may only be used with adult supervision at all times. ...
  • Page 3  In certain areas during winter, snow buildup and the low temperatures can damage the product. It is recommended to remove snow buildup and to store the product indoor.  We strongly recommend visual inspections every 3 months to insure the integrity of the entire product. Replace any parts as necessary.
  • Page 4 Consumer Information Sheet for Playground Surfacing Materials The US Consumer Product Safety Commission (CPSC) estimates that about 100 000 playground equipment- related injuries resulting from falls to the ground surface are treated annually in US hospital emergency rooms. Injuries involving this hazard pattern tend to be among the most serious of all playground injuries, and have the potential to be fatal, particularly when the injury is to the head.
  • Page 5 WOOD ADVICE Our products are manufactured from premium timber. Great care is taking in selecting, machining and treating the timber before it is sold to you. 1. Inspect wood parts monthly. The grain of the wood sometimes will lift in dry periods causing splinters to appear.
  • Page 6 • The swing frame must not be installed directly on cement, asphalt, or any other hard surface. • Your swing frame must be attached on a flat horizontal surface with a minimum of 2m between it and any structure or obstacle such as a fence, garage house, tree branches, cloths lines, or electric cables. For more information: http://www.lifespankids.com.au/natural-timber...
  • Page 7 10. The end beam is not straight up and down. Why not? This is normal. Backyard Discovery designs playsets this way to ensure the strongest structure possible. The slight angle adds strength and reduces rocking and twisting.
  • Page 8 Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.) (Square) (Level 24") (Phillips Screw Driver) (Open End Wrenches 1/2") (Tape Measure) (Drill Attachments: Phillips Head) (Cordless Drill or Electric Drill)
  • Page 9 Basic Setup Dimensions Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. 26'- 1/2" [7.9 m] 14'- 1/2" [1.8 m] [4.3 m] Safe Play Zone...
  • Page 10 Parts Identification Wood Components (NOT TO SCALE) E1 - FRONT LEFT UPRIGHT - W4L04782 1 3/8"x3 3/8"x81 3/4" (36x86x2076) E2 - FRONT RIGHT UPRIGHT - W4L04807 1 3/8"x3 3/8"x81 3/4" (36x86x2076) E3 - BACK LEFT UPRIGHT - W4L04783 1 3/8"x3 3/8"x81 3/4" (36x86x2076) E4 - BACK RIGHT UPRIGHT - W2A01499 1 3/8"x3 3/8"x81 3/4"...
  • Page 11 Parts Identification Wood Components (NOT TO SCALE) H10 - FLOOR SUPPORT - W4L04812 1"x3 3/8"x40 1/8" (24x86x1018) H11 - ROOF UPRIGHT - W4L04813 1"x3 3/8"x55 1/4" (24x86x1404) H74 - LEFT UPRIGHT - W100608 1"x3 3/8"x50 3/4" (24x86x1290) H75 - RIGHT UPRIGHT - W100609 1"x3 3/8"x50 3/4"...
  • Page 12 Parts Identification Wood Components (NOT TO SCALE) L2 - ARCHED ROOF BOARD - W4L04774 5/8"x4 3/8"x40" (16x112x1016) M1 - END ROOF RAIL - W4L04787 5/8"x3 3/8"x41 7/8" (16x86x1064) M2 - FLOOR BOARD - W4L04688 5/8"x3 3/8"x41 7/8" (16x86x1064) M3 - WALL BOARD - W4L04768 5/8"x3 3/8"x41"...
  • Page 13 Parts Identification Wood Components (NOT TO SCALE) M14 - PICKET - W4L04785 5/8"x3 3/8"x17 3/4" (16x86x452) M15 - WALL RAIL - W4L04776 5/8"x3 3/8"x16 5/8" (16x86x422) M16 - WINDOW WALL BOARD - W4L04780 5/8"x3 3/8"x14" (16x86x356) M17 - WINDOW WALL BOARD - W4L04770 5/8"x3 3/8"x6 1/2"...
  • Page 14 Parts Identification Wood Components (NOT TO SCALE) Q1 - BENCH SEAT - W4L04767 1"x4 3/8"x40 1/8" (24x112x1018) SB74 - SWING BEAM EXTENDED - W102419 2"x5 1/4"x89 1/2" (50x134x2274) W71 - SWING BEAM SUPPORT - W4L04856 2"x3 3/8"x49 5/8" (50x86x1260) FP1 - FLOOR PANEL - W2A01497 1 1/4"x19 1/8"x41 7/8"...
  • Page 15 Parts Identification Hardware KA - BOLT WH 5/16x4 1/2 - H100021 C - NUT BARREL WH 5/16x1 1/2 - H100006 M - BOLT WH 5/16x2 1/2 - H100014 (11) D - NUT BARREL WH 5/16x7/8 - H100005 (54) BG - T-NUT 5/16 - H100074 L - BOLT WH 5/16x2 1/4 - H100013 BE - T-NUT 1/4 - H100072 (13)
  • Page 16 Parts Identification Hardware (41) BT - SCREW PFH 8x2 1/2 - H100090 (17) CK - SCREW PFH 8x2 - H100111 CJ - NUT LOCK 5/16 - H100110 (85) BP - SCREW PFH 8x1 1/2 - H100086 BQ - SCREW PFH 8x1 1/4 - H100087 (96) BR - SCREW PFH 8x1 1/8 - H100088 (54)
  • Page 17 Parts Identification Accessories (NOT TO SCALE) FA - QUICK LINK - A100069 EA - HAND GRIP YELLOW PLASTIC - A100043 KN - CHAIN GREEN 31" - A100177 EZ - CHAIN GREEN 51.25" - A100068 (1) LATCHING KNOB WITH SCREWS - A6P00020 TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325 TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326 GD - L BRACKET 66x66x127 - A100140...
  • Page 18 Parts Identification Accessories (NOT TO SCALE) - WINDOW (FLAT PACK) - A6P00019 - SLIDE BED 8' YELLOW - A6P00033 - TARP .4x1014x2195 - A6P00035 1/32"x39 7/8"x86 3/8" (.4x1014x2195) - TRAPEZE - A6P00034 SQ - "A" REVISION TAG - A100314 - GROUND STAKE REBAR - A4M00527...
  • Page 19 H74 - LEFT UPRIGHT - W100608 1"x3 3/8"x50 3/4" (24x86x1290) M104 - LADDER RUNG - W102997 1"x3 3/8"x17 1/8" (24x86x434) LADDER ASSEMBLY STEP 1 SCREW PFH SCREW PFH 8x2 (8 PLCS) M104...
  • Page 20 H75 - RIGHT UPRIGHT - W100609 1"x3 3/8"x50 3/4" (24x86x1290) LADDER ASSEMBLY STEP 2 SCREW PFH SCREW PFH 8x2 (8 PLCS)
  • Page 21 M103 - REAR SUPPORT - W102996 5/8"x3 3/8"x18 1/4" (16x86x462) LADDER ASSEMBLY STEP 3 M103 SCREW PFH 8x1 1/2 (4 PLCS) SCREW PFH 8x1 1/2...
  • Page 22 M102 - ATTACHMENT BOARD - W4L04811 5/8"x3 3/8"x18 1/4" (16x86x462) LADDER ASSEMBLY STEP 4 M102 SCREW PFH 8x1 1/2 (4 PLCS) FLUSH SCREW PFH 8x1 1/2...
  • Page 23 M77 - SLIDE BRACE - W4L04711 5/8"x3 3/8"x14 1/4" (16x86x362) SLIDE ASSEMBLY STEP 1 BOLT WH 5/16x1/2 T-NUT 5/16 SLIDE BED 8' YELLOW (1 PLC) BOLT WH 5/16x1/2 (2 PLCS) T-NUT 5/16 (2 PLCS) 1/4" USE 'M77' SLIDE BRACE AS A TEMPLATE FOR DRILLING BOTTOM HOLE PATTERN IN SLIDE BED.
  • Page 24 EL - SLIDE RAIL 8' GREEN LEFT - A100055 M78 - CENTER SLIDE BRACE - W4L04712 5/8"x3 3/8"x14 1/4" (16x86x362) EK - SLIDE RAIL 8' GREEN RIGHT - A100054 SLIDE ASSEMBLY STEP 2 NOTE: MAKE CERTAIN SUPPORTS AND SLIDE BED ARE FULLY ENGAGED WITHIN CHANNEL OF SLIDE RAILS.
  • Page 25 SB74 - SWING BEAM EXTENDED - W102419 2"x5 1/4"x89 1/2" (50x134x2274) GD - L BRACKET 66x66x127 - A100140 TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326 TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325 SWING BEAM ASSEMBLY STEP 1 BOLT HEX 5/16x2-3/4 BOLT WH 5/16x1 3/4...
  • Page 26 W71 - SWING BEAM SUPPORT - W4L04856 H79 - END SUPPORT - W4L04855 2"x3 3/8"x49 5/8" (50x86x1260) 1"x3 1/2"x42" (24x86x1072) E77 - ANGLE BRACE - W4L04854 1 3/8"x3 3/8"x74 3/8" (36x86x1890) SWING BEAM ASSEMBLY STEP 2 WASHER LOCK EXT 8x19 NUT BARREL WASHER LOCK EXT 12x19 WH 5/16x7/8...
  • Page 27 SWING BEAM ASSEMBLY STEP 3 BOLT WH 5/16x2 1/2 NUT BARREL WH 5/16x7/8 BOLT WH 5/16x1 3/4 WASHER LOCK EXT 8x19 NUT BARREL WH 5/16x1 1/2 WASHER LOCK EXT 12x19 BOLT WH 5/16x1 3/4 (2 PLCS) NUT BARREL WH 5/16x7/8 (2 PLCS) BOLT WH 5/16x2 1/2 (2 PLCS)
  • Page 28 BZ - SWING HANGER QUICK LINK - H100099 SWING BEAM ASSEMBLY STEP 4 NUT LOCK 5/16 WASHER SAFETY 17x30 WASHER FLAT 8x27 NUT LOCK 5/16 (6 PLCS) WASHER FLAT 8x27 (6 PLCS) WASHER SAFETY 17x30 (6 PLCS) 1. Lock nut must be tightened until loop is tight against the safety washer.
  • Page 29 H1 - LEFT ROOF RAIL - W4L04806 K3 - GROUND BOARD - W4L04699 1"x3 3/8"x60" (24x86x1524) 5/8"x3 3/8"x48 5/8" (16x86x1234) H10 - FLOOR SUPPORT - W4L04812 1"x3 3/8"x40 1/8" (24x86x1018) K1 - GROUND BOARD - W4L04686 5/8"x5 1/4"x73 1/2" (16x134x1868) E3 - BACK LEFT UPRIGHT - W4L04783 1 3/8"x3 3/8"x81 3/4"...
  • Page 30 M8 - BRACE - W4L04762 5/8"x3 3/8"x30" (16x86x762) STEP 2 BOLT WH 5/16x1 WASHER LOCK EXT 8x19 NUT BARREL WH 5/16x5/8 WASHER LOCK EXT 12x19 BOLT WH 5/16x1 (6 PLCS) WASHER LOCK EXT 8x19 (6 PLCS) WASHER LOCK EXT 12x19 (6 PLCS) NUT BARREL WH 5/16x5/8 (6 PLCS)
  • Page 31 O1 - SAFETY RAIL - W4L04805 H5 - SWING BEAM RAIL - W4L04804 5/8"x1 3/8"x40 1/8" (16x34x1018) 1"x3 3/8"x40 1/8" (24x86x1018) M19 - WALL BOARD - W4L04814 5/8"x3 3/8"x40 1/8" (16x86x1018) STEP 3 LAG SCREW WH 5/16x2 1/2 LAG SCREW WH 5/16x2 SCREW PFH 8x1 1/2...
  • Page 32 H4 - FLOOR SUPPORT - W4L04690 H2 - RIGHT ROOF RAIL - W4L04786 1"x3 3/8"x40 1/8" (24x86x1018) 1"x3 3/8"x60" (24x86x1524) M4 - SERVING SHELF SUPPORT - W4L04695 5/8"x3 3/8"x40 1/8" (16x86x1018) K4 - GROUND BOARD - W4L04689 5/8"x5 1/4"x40 1/8" (16x134x1018) E2 - FRONT RIGHT UPRIGHT - W4L04807 1 3/8"x3 3/8"x81 3/4"...
  • Page 33 M5 - WALL BOARD - W4L04784 M11 - SERVING HEADER - W4L04698 5/8"x3 3/8"x40 1/8" (16x86x1018) 5/8"x3 3/8"x40 1/8" (16x86x1018) STEP 5 LAG SCREW WH 5/16x2 WASHER LOCK EXT 8x19 LAG SCREW WH 5/16x2 (4 PLCS) WASHER LOCK EXT 8x19 (4 PLCS)
  • Page 34 M18 - FLOOR SUPPORT - W4L04810 K2 - GROUND BOARD - W4L04685 5/8"x3 3/8"x40" (16x86x1016) 5/8"x5 1/4"x60 1/2" (16x134x1538) M6 - FLOOR SUPPORT - W4L04691 L2 - ARCHED ROOF BOARD - W4L04774 L1 - ARCHED ROOF BOARD - W4L04775 5/8"x3 3/8"x40" (16x86x1016) 5/8"x4 3/8"x40"...
  • Page 35 F71 - STANDARD ANGLE BRACE - W100689 H3 - FLOOR JOIST - W4L04692 1 3/8"x2 3/8"x13" (36x60x330) 1"x3 3/8"x40 1/8" (24x86x1018) SQ - "A" REVISION TAG - A100314 STEP 7 LAG SCREW SCREW PWH WH 5/16x2 1/2 8x5/8 SCREW PFH 8x2 1/2 BOLT WH 5/16x2 BOLT WH...
  • Page 36 M2 - FLOOR BOARD - W4L04688 5/8"x3 3/8"x41 7/8" (16x86x1064) FP1 - FLOOR PANEL - W2A01497 1 1/4"x19 1/8"x41 7/8" (32x485x1064) STEP 8 SCREW PFH (39) 8x1 1/2 SCREW PFH 8x1 1/2 (39 PLCS)
  • Page 37 K92 - RIGHT WALL BOARD - W4L04697 K93 - WALL BOARD - W4L04694 (10) 3/8"x2 3/4"x37 1/2" (11x70x954) 3/8"x3 3/8"x19 1/2" (11x86x495) STEP 9 SCREW PFH (45) 3 11/16 SCREW PFH 8x1 (45 PLCS)
  • Page 38 K91 - LEFT WALL BOARD - W4L04696 3/8"x2 3/4"x37 1/2" (11x70x954) STEP 10 SCREW PFH SCREW PFH 8x1 (5 PLCS)
  • Page 39 H9 - SHELF SUPPORT - W4L04764 K5 - SERVING SHELF - W4L04763 1"x3 3/8"x4 1/2" (24x86x114) 5/8"x5 1/4"x40 1/8" (16x134x1018) STEP 11 SCREW PFH 8x1 1/2 SCREW PFH 8x2 1/2 SCREW PFH 8x2 1/2 (2 PLCS) SCREW PFH 8x1 1/2 (5 PLCS)
  • Page 40 N2 - WALL BOARD - W4L04771 M3 - WALL BOARD - W4L04768 5/8"x2 3/8"x41" (16x60x1040) 5/8"x3 3/8"x41" (16x86x1040) M12 - WINDOW WALL BOARD - W4L04769 M17 - WINDOW WALL BOARD - W4L04770 5/8"x3 3/8"x25" (16x86x634) 5/8"x3 3/8"x6 1/2" (16x86x164) STEP 12 SCREW PFH (20) 8x1 1/8...
  • Page 41 N1 - HINGE BOARD - W4L04773 5/8"x2 3/8"x37 3/4" (16x60x958) STEP 13 SCREW PFH 8x1 1/8 SCREW PFH 8x1 1/8 (8 PLCS)
  • Page 42 M13 - WALL RAIL - W4L04777 M15 - WALL RAIL - W4L04776 5/8"x3 3/8"x19 1/4" (16x86x490) 5/8"x3 3/8"x16 5/8" (16x86x422) STEP 14 BOLT WH 5/16x2 WASHER LOCK EXT 8x19 T-NUT 5/16 T-NUT 5/16 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) BOLT WH 5/16x2 (2 PLCS)
  • Page 43 M5 - WALL BOARD - W4L04784 M19 - WALL BOARD - W4L04814 5/8"x3 3/8"x40 1/8" (16x86x1018) 5/8"x3 3/8"x40 1/8" (16x86x1018) STEP 15 LAG SCREW WH 5/16x2 WASHER LOCK EXT 8x19 WASHER LOCK EXT 8x19 (4 PLCS) LAG SCREW WH 5/16x2 (4 PLCS)
  • Page 44 N3 - WALL BOARD - W4L04779 M10 - WALL BOARD - W4L04778 5/8"x2 3/8"x30" (16x60x762) 5/8"x3 3/8"x30" (16x86x762) M17 - WINDOW WALL BOARD - W4L04770 M16 - WINDOW WALL BOARD - W4L04780 5/8"x3 3/8"x6 1/2" (16x86x164) 5/8"x3 3/8"x14" (16x86x356) STEP 16 SCREW PFH 8x1 1/8 (20 PLCS) SCREW PFH...
  • Page 45 M14 - PICKET - W4L04785 5/8"x3 3/8"x17 3/4" (16x86x452) STEP 17 SCREW PFH 8x1 1/8 (36 PLCS) SCREW PFH (36) 8x1 1/8 3 3/8 10 3/16 3 3/8 3 3/8 3 3/8 1 9/16...
  • Page 46 M10 - WALL BOARD - W4L04778 M9 - HANDLE WALL BOARD - W4L04781 5/8"x3 3/8"x30" (16x86x762) 5/8"x3 3/8"x30" (16x86x762) STEP 18 SCREW PFH 8x1 1/8 (8 PLCS) SCREW PFH 8x1 1/8 HOLES TOWARD BOTTOM 3 1/4 FLUSH 1 9/16...
  • Page 47 M1 - END ROOF RAIL - W4L04787 5/8"x3 3/8"x41 7/8" (16x86x1064) STEP 19 SCREW PFH 8x2 1/2 (8 PLCS) SCREW PFH 8x2 1/2...
  • Page 48 H6 - ROOF UPRIGHT - W4L04788 M7 - TOP ROOF RAIL - W4L04803 1"x3 3/8"x24" (24x86x610) 5/8"x3 3/8"x40" (16x86x1016) H11 - ROOF UPRIGHT - W4L04813 1"x3 3/8"x55 1/4" (24x86x1404) STEP 20 SCREW PFH 8x1 1/2 (4 PLCS) BOLT WH 5/16x1 3/4 BOLT WH 5/16x1 1/2 SCREW PFH...
  • Page 49 - TARP .4x1014x2195 - A6P00035 1/32"x39 7/8"x86 3/8" (.4x1014x2195) STEP 21 TARP .4x1014x2195 SCREW PWH 8x5/8 (8 PLCS) SCREW PWH 8x5/8 1 9/16...
  • Page 50 H7 - BENCH UPRIGHT - W4L04765 1"x3 3/8"x15" (24x86x380) STEP 22 BOLT WH 5/16x1 NUT BARREL WH 5/16x7/8 WASHER LOCK EXT 12x19 WASHER LOCK EXT 8x19 NUT BARREL WH 5/16x7/8 (4 PLCS) WASHER LOCK EXT 12x19 (4 PLCS) WASHER LOCK EXT 8x19 (4 PLCS) BOLT WH 5/16x1 (4 PLCS)
  • Page 51 H8 - SEAT SUPPORT - W4L04766 1"x3 3/8"x8 1/2" (24x86x216) STEP 23 BOLT WH 5/16x1 3/4 T-NUT 5/16 WASHER LOCK EXT 8x19 BOLT WH 5/16x1 3/4 (4 PLCS) T-NUT 5/16 (4 PLCS) WASHER LOCK EXT 8x19 (4 PLCS)
  • Page 52 Q1 - BENCH SEAT - W4L04767 1"x4 3/8"x40 1/8" (24x112x1018) STEP 24 SCREW PFH 8x1 1/2 SCREW PFH 8x1 1/2 (8 PLCS)
  • Page 53 EA - HAND GRIP YELLOW PLASTIC - A100043 STEP 25 SCREW TAPPING 14x1-1/2 BOLT PTH T-NUT 1/4 1/4x1 (2 PLCS) WASHER LOCK INT BOLT PTH 1/4x1 8x15 (2 PLCS) WASHER FLAT 9x18 T-NUT 1/4 WASHER FLAT 9x18 (4 PLCS) WASHER LOCK INT 8x15 (4 PLCS) SCREW TAPPING 14x1-1/2 (2 PLCS)
  • Page 54 FOLD OUTWARD BOTH SIDES AT THIS LOCATION K94 - WINDOW CLEAT - W4L04906 3/8"x1 1/8"x9 7/8" (11x30x252) - WINDOW (FLAT PACK) - A6P00019 STEP 26 SCREW PWH 8x5/8 SCREW PWH 8x5/8 (8 PLCS) WINDOW (FLAT PACK) (2 PLCS) CENTER WINDOW IN OPENING SCREW PWH 8x3/4 SCREW PWH 8x3/4...
  • Page 55 N5 - DOOR STOP SUPPORT - W4L04808 J1 - DOOR STOP - W4L04809 5/8"x2 3/8"x4 7/8" (16x60x125) 1"x2 3/8"x2" (24x60x50) STEP 27 SCREW PFH 8x1 1/2 SCREW PFH 8x1 1/4 SCREW PFH 8x1 1/4 (2 PLCS) SCREW PFH 8x1 1/2 (3 PLCS)
  • Page 56 DR1 - DOOR PANEL - W2A01498 1 1/2"x16 3/8"x36 3/8" (38x416x924) STEP 28 SCREW PFH (11) 8x1 1/2 CENTER DOOR IN TOP TO BOTTOM OPENING FLUSH WITH FRONT SURFACE OF 'N1' BOARDS SCREW PFH 8x1 1/2 (11 PLCS)
  • Page 57 (1) LATCHING KNOB WITH SCREWS - A6P00020 STEP 29 FACE PLATE KNOB KIT (1 PLC) (1 PLC) SCREW PFH 8x3/4 (2 PLCS) LATCH (1 PLC) SCREW PFH 8x1/2 (1 PLC)
  • Page 58 LADDER ASSEMBLY FINAL ASSEMBLY STEP 1 BOLT WH 5/16x1 1/4 T-NUT 5/16 (2 PLCS) WASHER LOCK EXT 8x19 T-NUT 5/16 WASHER LOCK EXT 8x19 (2 PLCS) BOLT WH 5/16x1 1/4 (2 PLCS)
  • Page 59 SWING BEAM ASSEMBLY FINAL ASSEMBLY STEP 2 BOLT HEX 5/16x1 1/4 BOLT HEX 5/16x1 1/4 (4 PLCS) WASHER FLAT 8x27 WASHER SPLIT 5/16 T-NUT 5/16 (4 PLCS) T-NUT 5/16 WASHER FLAT 8x27 (4 PLCS) WASHER SPLIT 5/16 (4 PLCS)
  • Page 60 SLIDE ASSEMBLY FINAL ASSEMBLY STEP 3 DRILL (3) 7/16" DIA HOLES THROUGH SLIDE BED AND DECK AT LOCATIONS SHOWN. BOLT WH 5/16x1/2 3 15/16 T-NUT 5/16 3 15/16 2 3/16 DRILL PATTERN BOLT WH 5/16x1/2 (3 PLCS) T-NUT 5/16 (3 PLCS)
  • Page 61 HD - SWING SEAT YELLOW - A100171 FA - QUICK LINK - A100069 EZ - CHAIN GREEN 51.25" - A100068 FINAL ASSEMBLY STEP 4 TIGHTEN QUICK LINK INSERT CHAIN INTO QUICK LINK CHAIN GREEN 51.25" (4 PLCS) QUICK LINK (4 PLCS) SWING SEAT YELLOW (2 PLCS)
  • Page 62 - TRAPEZE - A6P00034 FA - QUICK LINK - A100069 KN - CHAIN GREEN 31" - A100177 FINAL ASSEMBLY STEP 5 TIGHTEN QUICK LINK INSERT CHAIN INTO QUICK LINK CHAIN GREEN 31" (2 PLCS) QUICK LINK (2 PLCS) TRAPEZE (1 PLC)
  • Page 63 - GROUND STAKE REBAR - A4M00527 FINAL ASSEMBLY BOLT WH STEP 6 5/16x1/2 TAP IN GROUND STAKES AT AN APPROXIMATE 45° ANGLE AT THE NUT BARREL LOCATIONS SHOWN. WH 5/16x5/8 BOLT WH 5/16x1 1/4 WASHER LOCK EXT 12x19 DRILL 7/16" [10mm] HOLE AT EACH STAKE LOCATION.
  • Page 64 WARRANTY AUSTRALIAN CONSUMER LAW Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come with guarantees that cannot be excluded under the Australian Consumer law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Table of Contents