Summary of Contents for Backyard Discovery WOODLAND 6014
Page 1
MANUFACTURED BY: WOODLAND Wooden Swing Set Backyard Discovery 3305 Airport Drive Pittsburg, KS 66762 Model # 6014 Owner's Manual & Assembly Instructions 800-856-4445 average 2 person assembly time assembly time may vary based on skill level For the most up to date assembly manual, to register your set, or to order replacement parts please visit www.backyarddiscovery.com...
Page 2
STOP Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.swingsetsonline.com 1-800-765-4138 PLEASE READ THIS BEFORE STARTING ASSEMBLY...
Page 3
Owner’s Manual Play Set Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
Page 4
Owner’s Manual Play Set Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Playcenter 1. The Playcenter is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation.
Page 5
Owner’s Manual Play Set The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth 6" (152mm) 9" (228mm) 12" (304mm) to 9"...
Page 6
Owner’s Manual Play Set 18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard.
Page 7
Third Party Assembly: Customer may, in their sole discretion, elect to use a third party person or service to assemble this product. Backyard Discovery assumes no responsibility or liability for any charge incurred by the Customer for any assembly services’.
Page 8
Owner’s Manual Play Set APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information: www.cpsc.gov/cpscpub/pubs/323.html. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK X3.1 Select Protective Surfacing—One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment.
Page 9
5. How often should the playset be stained? Backyard Discovery recommends the playset be stained once each year. A water or oil based stain can be used at the customer’s discretion. 6. Why does it seem that my swing set is developing cracks? Wood is a natural material;...
Page 10
Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.) (Square) (Level 24") (Tape Measure) (Claw Hammer) (Phillips Screw Driver) (Open End Wrenches 1/2") (Drill Attachments: Phillips Head) (Cordless Drill or Electric Drill)
Page 11
Basic Setup Dimensions Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. Safe Play Zone 16'-8 1/16" [5.1 m] [1.8 m] General Information: Your set has been designed and engineered for...
Page 22
Parts Identification Hardware (142) AC - WASHER LOCK EXT 8x19 - H100030 C - NUT BARREL WH 5/16x1 1/2 - H100006 (22) AD - WASHER LOCK EXT 12x19 - H100031 (23) D - NUT BARREL WH 5/16x7/8 - H100005 CA - WASHER FLAT 11x25 - H100102 (19) CD - WASHER FLAT 8x27 - H100105 B - NUT BARREL WH 5/16x5/8 - H100004...
Page 23
Parts Identification Hardware & Accessories BF - T-NUT 3/8 - H100073 (94) BG - T-NUT 5/16 - H100074 (26) BE - T-NUT 1/4 - H100072 (13) CJ - NUT LOCK 5/16 - H100110 - T-40 Torx Bit - A100042 - T-30 TORX BIT - H100147 FA - QUICK LINK - A100069...
Page 24
Parts Identification Accessories (NOT TO SCALE) DP - SWING SEAT GREEN - A100027 DN - GLIDER SEAT DARK GREEN - A100025 EX - GLIDER BUSHING BYD GREEN - A100066 EW - GLIDER SUPPORT BYD GREEN - A100065 EY - TUBING CAP GLIDER SUPPORT - A100067 (12) EV - CLIMBING ROCK - GREEN - A100064 EF - CHAIN GREEN 57"...
Page 25
Parts Identification Accessories (NOT TO SCALE) QU - SLIDE VF 10 FT - A100287 LATCHING KNOB - A6P00028 SWING HANGER QUICK LINK - A4M00505 (12) - L BRACKET 2.5x38x50x55 - A100340 HC - BYD ID TAG (LARGE) AGES 3-10 - A100164 - HAND GRIP METAL GREEN 381 c/c - A100118 KC - METAL GROUND STAKE BROWN - A100178...
Page 29
JV - HAND GRIP GREEN 816 c/c - A100134 5 FOOT LADDER ASSEMBLY STEP 4 LAG SCREW WH 1/4x1-1/2 (4 PLCS) LAG SCREW WH 1/4x1-1/2 HAND GRIP GREEN 816 c/c (2 PLCS)
Page 30
E72 - LEFT RAIL - W100036 E73 - RIGHT RAIL - W100037 1 3/8"x3 3/8"x61 3/4" (36x86x1570) 1 3/8"x3 3/8"x61 3/4" (36x86x1570) M74 - ROCK WALL BOARD - W100987 M75 - ROCK WALL BOARD - W100988 M76 - ROCK WALL BOARD - W100989 (10) 5/8"x3 3/8"x26 5/8"...
Page 31
M108 - TOP BOARD - W103105 5/8"x3 3/8"x27 7/8" (16x86x707) ROCKWALL ASSEMBLY STEP 2 USING M108 AS A GUIDE, PRE-DRILL TOP EDGE OF RAILS WITH 1/8" DRILL BIT. FAILURE TO PRE-DRILL MAY RESULT IN BOARD SPLITTING. SCREW PFH 8x1 1/2 SCREW PFH 8x1 1/2 (2 PLCS) M108...
Page 32
(12) EV - CLIMBING ROCK - GREEN - A100064 ROCKWALL ASSEMBLY STEP 3 BOLT PTH (24) 1/4x1 1/4 WASHER (24) LOCK INT 8x15 (24) T-NUT 1/4 BOLT PTH 1/4x1 1/4 (24 PLCS) WASHER LOCK INT 8x15 (24 PLCS) T-NUT 1/4 (24 PLCS)
Page 38
- 6" SWING HANGER QUICK LINK - H100097 EY - TUBING CAP GLIDER SUPPORT - A100067 - GLIDER SUPPORT BYD GREEN - A100065 - GLIDER BUSHING BYD GREEN - A100066 SWING BEAM ASSEMBLY STEP 5 NUT LOCK 5/16 (4 PLCS) BOLT WH 5/16x5 3/4 TUBING CAP GLIDER SUPPORT...
Page 39
E2 - RIGHT UPRIGHT - W4L04463 1 3/8"x3 3/8"x59" (36x86x1500) E1 - LEFT UPRIGHT - W4L04458 WP10 - LEFT WALL PANEL - W2A01470 1 3/8"x3 3/8"x59" (36x86x1500) 1 5/8"x19"x26 1/8" (40x482x664) FORT ASSEMBLY STEP 1 LAG SCREW WH 5/16x2 SCREW PFH 8x1 3/4 WASHER LOCK EXT...
Page 56
E3 - UPPER UPRIGHT - W4L04473 1 3/8"x3 3/8"x33 1/4" (36x86x844) FORT ASSEMBLY STEP 18 MAKE SURE ALL 'E3' UPRIGHTS ARE FLUSH WITH THE BOLT WH BOTTOM OF THE FLOOR RAILS. SEE NOTE BELOW. 5/16x2 1/4 LAG SCREW PILOT HOLES TO WH 5/16x2 THE OUTSIDE OF BOARDS.
Page 57
T3 - FLOOR SUPPORT RAIL - W4L04477 1"x1 3/8"x8 1/2" (24x34x215) T1 - FLOOR SUPPORT RAIL - W4L04474 1"x1 3/8"x40 5/8" (24x34x1032) T2 - FLOOR SUPPORT RAIL - W4L04476 1"x1 3/8"x16 7/8" (24x34x430) FORT ASSEMBLY STEP 19 FLUSH SCREW PFH (12) 8x1 3/4 SCREW PFH 8x1 3/4...
Page 84
H2 - ROOF SUPPORT - W4L04491 1"x3 3/8"x52 1/4" (24x86x1328) FORT ASSEMBLY STEP 46 INSTALL T-NUTS TO WALL BOARDS BEFORE ATTACHING 'H2' BOLT WH BOARDS TO FORT. BE SURE AND ORIENT THEM AS SHOWN, 5/16x1 1/2 TO INSIDE OF CABIN. SCREW PFH 8x1 3/4 WASHER...
Page 88
N5 - SUNBURST BOARD - W4L04493 N6 - SUNBURST BOARD - W4L04494 K80 - SUNBURST HALF MOON - W103694 5/8"x2 3/8"x15" (16x60x382) 5/8"x2 3/8"x9" (16x60x230) 5/8"x3 3/4"x10 3/8" (16x96x264) FORT ASSEMBLY STEP 50 ATTACH SUNBURST BOARDS AS SHOWN ON ONE SIDE OF FORT. REPEAT THIS STEP ON OTHER SIDE OF FORT.
Page 105
FORT ASSEMBLY STEP 67 REPEAT STEPS 61 THROUGH 66 AND ATTACH A SECOND SEAT UNDER THE CENTER SHELF. REPEAT STEPS 61 THROUGH 66 AND ATTACH THE THIRD SEAT UNDER THE LEFT SHELF.
Page 106
DR1 - DOOR PANEL - W2A01482 1 1/4"x16"x23 1/2" (32x406x596) FORT ASSEMBLY STEP 68 ATTACH DOOR AS SHOWN, USING SCREWS THROUGH HOLES IN PLASTIC HINGE. SCREW PWH 8x1-1/4 SCREW PWH 8x1-1/4 (9 PLCS)
Page 113
KC - METAL GROUND STAKE BROWN - A100178 NOTE: GROUND STAKE ATTACHMENT FAILURE TO USE GROUND STAKES CAN VOID WARRANTY & CAUSE INJURY! LAG SCREW WH 1/4x1-1/2 WASHER FLAT 9x18 APPROXIMATE LOCATION OF GROUND STAKES TWIST STAKES INTO GROUND ON FORT (LOOKING DOWN FROM TOP) AGAINST GROUND BOARDS APPROXIMATELY WHERE SHOWN.
Page 114
HC - BYD ID TAG (LARGE) AGES 3-10 - A100164 ID PLATE ATTACHMENT BYD ID TAG (LARGE) AGES 3-10 (1 PLC) SCREW PFH SCREW PFH 8x3/4 8x3/4 (2 PLCS)
Page 115
EZ - CHAIN GREEN 51.25" - A100068 DN - GLIDER SEAT DARK GREEN - A100025 FA - QUICK LINK - A100069 DO - CAPTAINS GLIDER ARM YELLOW - A100026 5' CAPTAINS GLIDER ASSEMBLY BOLT WH 5/16x5 3/4 NUT LOCK 5/16 WASHER FLAT 8x27 CHAIN GREEN 51.25"...
Page 116
GLIDER ATTACHMENT SWING HANGER QUICK LINK (4 PLCS) CHAIN GREEN 51.25" (4 PLCS)
Page 117
EF - CHAIN GREEN 57" - A100047 DP - SWING SEAT GREEN - A100027 FA - QUICK LINK - A100069 SWING ATTACHMENT CHAIN GREEN 57" (4 PLCS) QUICK LINK (4 PLCS) SWING SEAT GREEN (2 PLCS)
Page 118
SR - "B" REVISION TAG - A100315 REVISION TAG ATTACHMENT FIND AN APPROPRIATE SPOT UNDER THE FLOOR AND ATTACH REVISION TAG. (AS SUGGESTED BELOW.) "B" REVISION TAG (1 PLC) SCREW PWH 8x5/8 (2 PLCS) SCREW PWH 8x5/8 FINAL STEP DOUBLE CHECK EVERY BOLT, SCREW AND NUT FOR TIGHTNESS.
Page 119
Limited Warranty. In addition, Backyard Discovery will replace any parts within the first 30 days from date of purchase found to be missing from or damaged in the original packaging.
Need help?
Do you have a question about the WOODLAND 6014 and is the answer not in the manual?
Questions and answers