Table of Contents
Related Manuals for ELPRO Libero Ti1
Summary of Contents for ELPRO Libero Ti1
- Page 1 Libero. New dimensions. The independent PDF Data Logger. Libero makes the evaluation of temperature data worldwide possible – and this without any software! elproLibero Synergy between Datalogger & Adobe® PDF/A Seite 1 von 12...
-
Page 2: Technical Specifications
Libero. New dimensions. The independent PDF Data Logger. Technical Specifications Feature / Specifications Libero Ti1 Libero Ti1-S Type Mobile Temperature Data Logger Record options Multiple use Single use Start/stop mode Start/stop mode Record mode Loop mode Temperature Measurement Range -35°C to +70°C +/- 0.2°C for the -10°... - Page 3 Libero Sample Analysis Report elproLibero Synergy between Datalogger & Adobe® PDF/A Seite 3 von 12...
-
Page 4: Display Explanations
Battery life in days How do you work with Libero? 1. Configuration / Set-up Elpro sends new equipment in “OFF” mode (turned off). This allows storing Libero without any loss of battery power. Bat.End With the first time use, the equipment is activated over the USB interface of the PC. The user enters the specific data (company name, memory mode, measurement interval, password protection, etc.) by means of a... - Page 5 3. At destination Take Libero out of the shipment. Press the ARRIVED key to mark the end of this transport section. Logging Arrived °C Bat.End Libero shows the transport status: a) OK = your product has well traveled. b) ALARM = your product has been out of specifications during transportation. The lower limits have been violated.
-
Page 6: Recording Modes
Libero Display – Some examples: Recording modes Loop Mode: Logging Transit °C Bat.End There are always the last xs days (depending on the measurement interval) present in the memory. For example 55 days if a 5-minute measurement interval has been selected. (16'000 temperature measuring points available in total) Start / Stop Mode: Recording time run off. - Page 7 Alarm possibilities a) 2 Alarm Limits (Minimum / Maximum): The lower and upper alarm limits can be set with the configuration program. With the function keys TRANSIT and ARRIVED, the transport section is marked. In case of an exposure of the set limits within the current transport section, the sign changes to In the submenu, the measured values can be displayed: Logging...
- Page 8 Libero Configuration Tool – Sample screens Libero can be customized. With the free configuration tool available through the Internet, parameters can be pro- grammed such as password, sender information, logging mode, alarms, etc. Certain configuration profiles can be stored, e.g. per product or per destination, so that initializing can efficiently be accomplished. After the program start, the main program screen shows a list of the plugged in Libero’s.
- Page 9 Input of the 2 alarm limits: Input of the 5 alarm / time ranges: Configuring the PDF evaluation report: Input of calibration data: elproLibero Synergy between Datalogger & Adobe® PDF/A Seite 9 von 12...
-
Page 10: Packaging Options
This allows the shipping department to only insert the details of the individual shipment. Packaging Options Elpro provides you with a proposal for a packaging that incorporates a short instruction and might be used to send Libero back. elproLibero Synergy between Datalogger &...
Need help?
Do you have a question about the Libero Ti1 and is the answer not in the manual?
Questions and answers