Adjustments; Spring Preload; Rebound Damping Adjustment - Marzocchi Monster T Instructions Manual

ADJUSTMENTS

SPRING PRELOAD

The spring preload for COMPRESSION
damping can be adjusted by turning the
knob (2) on top of fork legs. From the
factory the fork is set at minimum preload,
i.e. the adjustment knob completely un-
screwed counterclockwise. However,
springs are slightly preloaded to help coun-
teract static loads during COMPRESSION.
By turning the adjustment knob clockwise,
the preload is increased up to the maximum
value equal to 15 mm of spring preload.
This adjustment is essential in order to have
the right fork response for the rider's weight
and riding style.
Monster
T

REBOUND DAMPING ADJUSTMENT

Fork legs feature an adjuster (E) for RE-
BOUND DAMPING adjustment. Turning
this adjuster clockwise into the cartridge
rod, changes the hydraulic setting of the
inner valves. In short, the amount of adjust-
ment applied on the piston in the fluid
determines the rate of compressionrebound
damping.
To adjust, always start from the minimum
damping setting, i.e. unscrew completely
counterclockwise. About 8 turns - abt. 4 mm
of the adjustment - are possible.
E
2