Select Of The Heater Mode - Fujikura 36S Instruction Manual

Select of the Heater Mode

Each tube-heating mode is optimized for a type of Fujikura protection sleeve. These modes
can be found in database area for reference. Copy the appropriate one and paste it to the
user-programmable area. The operator can edit the user-programmable modes.
Data Base
Parameter
60mmS
FP-03
60mmS
FP-03(250um)
40mmS
FP-03(L=40)
60mmSS
SLIM 60
40mmSS
SLIM 40
15mmS
FPS01-400-15
20mmS
FPS01-900-20
60mmS
FPS01-DC-60
FUSE900
SC-LC-ST-FC
FUSE2/3
SC-LC
The dimensions of the Protection Sleeve after heat shrink
Form
FP-03
FP-03(40mm)
FP-04T
FPS01-400-15
FPS01-900-20
* The dimensions of the protection sleeve after shrink depends on the diameter of
the fiber.
Description
For standard 60mm protection sleeves, such as Fujikura FP-03 or
FP-03M protection sleeves.
For standard 60mm protection sleevse and 250um diameter coating,
such as Fujikura FP-03 or FP-03M protection sleeves.
For standard 60mm protection sleeves for fibers with 8mm cleave
length, such as Fujikura FP-03 or FP-03M protection sleeves.
For slim type 60mm protection sleeves.
For slim type 40mm protection sleeves.
For 400 or less um diameter coating and splice length of 5 mm or less
For 900 or less um diameter coating and splice length of 6 mm or less
For drop cable splice.
For Fuse connect splice.
Sleeve
Rod Material
length
SUS 60mm
SUS 40mm
Glass ceramic 40mm
SUS 15mm
SUS 20mm
Outer tube
Inner tube
Rod
41S_Rev01
Basic Operation
Prepared Diameter of
fiber length optical fiber
16mm or less 250~900um
10mm or less 250~900um
10mm or less 250~900um
5mm or less ~400um
6mm or less ~900um
Sleeve length *
Diameter
result
3.1mm
3.1mm
4.0mm
1.5mm
2.3mm
24