Washer Fluid-Level Sensor - Mazda RX-8 Manual

Hide thumbs Also See for RX-8:

Table of Contents

WASHER FLUID-LEVEL SENSOR

WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the washer tank. (See WINDSHIELD WASHER TANK REMOVAL/INSTALLATION )

3. Disconnect the connector.

4. Remove the washer fluid-level sensor.

5. Remove the grommet.

6. Install in the reverse order of removal.

WASHER FLUID-LEVEL SENSOR INSPECTION

1. Disconnect the negative battery cable.

2. Inspect for continuity between the washer fluid-level sensor terminals using an ohmmeter.

If not as specified, replace the washer fluid-level sensor.

Do you have a question about the RX-8 and is the answer not in the manual?