Clutch Master Cylinder: Removal - Refitting - Renault Laguna III Manual

MECHANICAL COMPONENT CONTROLS
Clutch master cylinder: Removal - Refitting
LEFT-HAND DRIVE
Special tooling required
Emb. 1797 Socket (24 mm) for removal -
refitting of the clutch master
cylinder
WARNING
Prepare for the flow of fluid, and protect the sur-
rounding components.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 415, 02A, Lifting equip-
ment).
a Disconnect the battery (see Battery: Removal - Re-
fitting) (MR 415, 80A, Battery).
a Remove:
- the air filter box (see Air filter unit: Removal - Re-
fitting) (MR 415, 12A, Fuel mixture),
- the bolt (1) from the max fuse box.
a Move the max fuse box to one side.
a Remove:
- the engine undertray bolts,
- the engine undertray.
PK4
a Remove the bleed plug (2) .
a Connect a transparent pipe to the bleed hole running
to an empty container placed under the bleed hole.
a Slightly loosen the bleed screw (3) .
123036
37A-54
37A
113919