Entering Data - Rohde & Schwarz RTP Series User Manual

®
R&S RTP

2.3.8 Entering Data

Most important parameters have their own rotary knobs on the front panel. When you
turn a knob, the input box appears the lower right corner of the screen, showing the
parameter name and current value.
Using rotary knobs
1. Turn the knob to change the value.
2. To toggle the increment, tap the "Steps" icon in the input box.
3. To set the parameter to the autoset value (if available), tap the "RESET" icon.
For data input in dialog boxes, the touchscreen provides an on-screen keypad to enter
numeric values and units. For text input, the on-screen keyboard with English key lay-
out is used.
To enter values with the on-screen keypad
1. Double-tap the entry field.
The on-screen keypad opens.
2. Enter the numeric value using the following methods:
●
●
User Manual 1337.9952.02 ─ 05
To use the default value, tap "Reset" (if available).
To use the minimum or maximum value, tap "Min" or "Max", respectively.
Getting Started
Operating the Instrument
73