Class Code 103 (0X67): Abb Analog Output Object; Class Code 105 (0X69): Abb Parameter Object - ABB DNP31.0 Technical Description

Class Code 103 (0x67): ABB Analog Output Object

The ABB Analog Output Object models the analog outputs of the device connected to the DNP31.
There is a separate instance for each analog output available on the device.
Class Attributes
Attribute Access Name
2 Get Number of Analog Outputs
*1) The number of analog outputs depends on the device connected to the DNP31. For detailed informa-
tion, please refer to the device manual.
Instance Attributes
Attri- Access Name
bute
3 Get/Set Analog Output Value
Common Services
Service Code Class
14 (0x0E) No
16 (0x10) No

Class Code 105 (0x69): ABB Parameter Object

The ABB Parameter Object provides the parameter for non-modular devices and for the adapter module
(slot 0) of modular devices. The index always corresponds to the parameter number. The attribute is fixed
to 3.
The use of the ABB Parameter Object provides a known public interface to a device's configuration data.
In addition, this object also provides all the information necessary to define and describe each of a de-
vice's individual configuration parameters.
This object allows a device to fully identify a configurable parameter by supplying a full description of
the parameter, including minimum and maximum values and a human-readable text string describing the
parameter.
The complete description of an device's parameters (as of writing UMC100.3) can be found in the device
manual.
Configuration tools obtain the parameter description automatically from the EDS file.
Class Attributes
Attribute Access
2 Get
*1) The number of parameters depends on the device connected to the DNP31 (as of writing UMC100.3).
For detailed information, please refer to the device manual.
Instance Attributes
Attribute Access
3 Get/Set *2)
*2) The Set service is not available for read-only parameters.
Common Services
Service Code Class
14 (0x0E) No
16 (0x10) No
Issue: 09.2015
Instance Service Name
Yes Get_Attribute_Single
Yes Set_Attribute_Single
Name
Number of Parameters (Max. Instance)
Name
Parameter Value
Instance Service Name
Yes Get_Attribute_Single
Yes Set_Attribute_Single
Type
USINT
Type
INT
Type
USINT
Type
LINT
- 21 -
Value
*1)
Value
Output State
Value
*1)
Value
Actual value
Data sheet DNP31.0