Use-Ice - Yamaha CS-700 Series Integrators Reference Manual

multiple addresses by comma.
CLI Format Examples:
get stun-srv
val stun-srv 10.123.145.15
set stun-srv 10.123.145.15
notify voip.stun-srv 10.123.145.15
Supported Products: CS700-SP
Available in API Version: 1.1

use-ice

Description: Enables the use of the ICE (Interactive Connectivity Establishment) protocol for NAT
traversal. ICE takes advantage of STUN and TURN to identify candidates (IP addresses and
ports) for communication, evaluating and prioritizing the candidate pairs to select the best
route. Expensive candidates, such as using a media relay, are selected only as a last resort.
(For ICE see IETF RFC 5245.)
Property Actions: set, get, notify
Default Value: 0
Command Definition:
Action Definition
get
get use-ice
response
val use-ice <0|1>
set set use-ice <0|1>
notify notify voip.use-ice <0|1>
Parameters:
Parameter Description
0
Disable ICE
1
Enable ICE
CLI Format Examples:
get use-ice
val use-ice 0
set use-ice 0
notify voip.use-ice 0
Supported Products: CS700-SP
Available in API Version: 1.1
Yamaha CS-700 Integrators Reference Guide 117