Bohmer-AG W series Instruction Manual
  1. Manuals
  2. Brands
  3. Bohmer-AG Manuals
  4. Portable Generator
  5. W Series
  6. Instruction manual

Bohmer-AG W series Instruction Manual

Hide thumbs Also See for W series:
Table of Contents

Advertisement

Quick Links

PETROL GENERATOR
Instruction Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W series and is the answer not in the manual?

Questions and answers

Related Manuals for Bohmer-AG W series

Summary of Contents for Bohmer-AG W series

  • Page 1 PETROL GENERATOR Instruction Manual...

  • Page 2: Safety Messages

    The generator is a potential source of electrical shock if misused. Do not expose the generator to moisture, rain or snow. DO not let the generator get wet, and do not operate it with wet hands. Thank you for purchasing a Böhmer-AG generator. We want to help you get the best results from your new generator and to operate it safely.
  • Page 3 help prevent accidents by being familiar with your generator's controls and by observing safe operating procedures. Operator Responsibility 1. Know how to stop the generator quickly in case of emergency. 2. Understand the use of all generator controls, output receptacles, and connections 3.

  • Page 4: Component Identification

    COMPONENT IDENTIFICATION __________________________________________________________________________________...
  • Page 5 Record the Engine Frame Serial Numbers for your future reference. Refer to these serial numbers when ordering parts, and when making technical or warranty enquiries. Frame Serial Number ____________________________________________________________ Engine Serial Number ____________________________________________________________...

  • Page 6: Recoil Starter

    CONTROLS __________________________________________________________________________________ Engine Switch To start and stop the engine Switch Position: OFF: To stop the engine ON: To run the engine RECOIL STARTER __________________________________________________________________________________ To start the engine, pull the starter grip lightly until resistance is felt, then pull briskly NOTICE: Do not allow the starter to snap back against the engine.

  • Page 7: Choke Lever

    CHOKE LEVER __________________________________________________________________________________ The choke is used to provide an enriched fuel mixture when starting a cold engine. It can be opened and closed by operating the choke lever manually. Move the lever to the CLOSE position to enrich the mixture. PRE-OPERATION CHECK __________________________________________________________________________________ ENGINE OIL...

  • Page 8: Fuel Recommendation

    1. Remove the oil filler cap and wipe the dipstick clean. 2. Check the oil level by inserting the dipstick into the filler neck without screwing it in. 3. If the level is low, add the recommended oil to the upper mark on the dipstick. FUEL RECOMMENDATION __________________________________________________________________________________ 1.
  • Page 9 Fuel tank capacity: 11 Litres (2.9 US Gal, 2.4 Imp gal) Use gasoline with a pump octane rating of 86 or higher We recommend unleaded gasoline because it produces fewer engine and spark plug deposits and extends exhaust system life. Never use stable or contaminated gasoline or oil/gasoline mixture.

  • Page 10: Starting/Stopping The Engine

    Methanol (methyl or wood alcohol) Gasoline containing methanol must contain solvents and corrosion inhibitors to protect the fuel system. Gasoline containing more than 5% methanol by volume may cause starting and /or performance problems and may damage metal, rubber and plastic parts of your fuel system. MTBE (methyl tertiary butyl ether) You may use gasoline containing up to 15% MTBE by volume.

  • Page 11: Engine Oil Change

    ENGINE OIL CHANGE __________________________________________________________________________________ Drain the oil while the engine is warm to assure complete and rapid draining. 1. Remove the drain plug and sealing washer, oil filler cap, and drain the oil. 2. Reinstall the drain plug and sealing washer, tighten the plug securely. 3.

  • Page 12: Fuel Sediment Cup Cleaning

    2. Wash the element in a solution of household detergent and warm water, then rinse thoroughly or wash in non-flammable or high flash point solvent .Allow the element to dry thoroughly. 3. Soak the element in clean engine oil and squeeze out the excess oil. The engine will smoke during initial start-up if too much oil is left in the element.

  • Page 13: Spark Plug Service

    SPARK PLUG SERVICE __________________________________________________________________________________ Recommended spark plugs: BPR6ES (NGK) / W20EPR-U (NIPPONDENSO) To ensure proper engine operation, the spark plug must be properly gapped and free of deposits. If the engine has been running, the muffler will be very hot. Be careful not to touch the muffler. 1.

  • Page 16: Ce Declaration Of Conformity

    CE DECLARATION OF CONFORMITY We hereby declare that the machine described below complies with the relevant basic safety and health requirements of the EU Directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is modified without our prior approval.

This manual is also suitable for:

6500w

Table of Contents

Save PDF