Product description The screening tube adapter can be used for all VEGACAP 63 and VEGACAL 63 and 64 sensors with rod ø 16 mm (0.63 in). Typical applications of the screening tube adapters are e.g. for con- densation or sockets.
Page 3
2. If it is harmless to the process, grease the two O-rings with an acid-free grease so that the rod of the probe slides more easily 3. Push the rod of the probe (1) through the screening tube adapter Screening tube adapter • for VEGACAL 63, 64/VEGACAP 63...
Page 4
Version: capacitive screening, vacuum-tight Fig. 2: Mounting of the screening tube adapter - capacitive screening, vacuum- tight Probe Process seal Screening tube adapter O-rings (2 pcs.) Pressure screw Screening tube adapter • for VEGACAL 63, 64/VEGACAP 63...
Page 5
The VEGACAP probe must be re-compensated after mounting the screening tube adapter. Use the compensation key on the electronics module. You can find the instructions for this in the operating instruc- tions of the probe. Screening tube adapter • for VEGACAL 63, 64/VEGACAP 63...
Need help?
Do you have a question about the VEGACAL 63 and is the answer not in the manual?
Questions and answers