Height Adjustment - Miele DA 1867 Operating And Installation Instructions

 Attach the vapour canopy with
cabinet door fitted and then close it.
It is possible to adjust the movement
of the vapour canopy. This may be
required if a heavy cabinet door is to
be fitted, for example.
 Remove the two cover caps which
conceal the adjusting screws at the
front right and left on the lower edge
of the appliance.
 Adjust the screws evenly on both
sides using a cross-slotted
screwdriver. Turn clockwise to tighten
the mechanism and anti-clockwise to
loosen the mechanism.
 Refit the caps.

Height adjustment

Adjusting screws in the brackets
located at the top of the appliance are
used for aligning the appliance with
adjoining furniture units.
 Turning the screws anti-clockwise
raises the appliance and clockwise
lower it.
 You may also have to adjust the
depth again.
Installation
27