30 Second Programming Guide - Vanderbilt ACT 5e Installation Manual

2 30 Second Programming Guide

This instructions apply for a typical system.
1. Enter Programming Mode
On the digital keypad press . Input the programming code (default is 9999). The LED flashes
amber.
2. Change User 1 Code
On the digital keypad press 0. Input 1 (for User 1). Input the new User 1 code (4 digits).
3. Change Programming Code
On the digital keypad press 0. Input . Input the new programming code (4 digits).
4. Exit Programming Mode
On the digital keypad press . The LED turns red and programming mode is exited.
The keypad is now ready for normal use.
The keypad may be returned to its factory default condition at any time by entering the programming
mode and pressing three times.
Incorrect Code Lockout: When three invalid codes are entered in a row, the keypad enters lockout
mode for 20 seconds. During this time, the red indicator flashes and all user codes are inactive.
© Vanderbilt 2018 5
A-100443
31.01.2018