Siemens SIMATIC TOP connect Manual page 71

Terminal module TPOo optocoupler for outputs
6ES7924-0BF20-0Bx0
Mounting position
Connecting terminals
Stripped length
Conductor cross-section
Finely stranded without end sleeve
With end sleeve for screw-type terminals
With end sleeve, push-in system
Screwdriver
Tightening torque of screw-type terminals
Weight
Screw model
Push-in model
Clearances and creepage distances
Dimensions (W x H x D) in mm
6ES7924-0BF20-0Bx0
Terminal modules for 50-pin connecting cable
Table 6-13
Terminal modules TP1 and TP3, 50-pin
1-wire connection without LED 6ES7924-2AA20-0Ax0
3-wire initiators without LED 6ES7924-2CA20-0Ax0
Type of supply voltage
Operating voltage
Max. permissible continuous current per signal
Max. permissible total current (power supply)
Connection to SIMATIC fitted for
Operating temperature
Mounting position
Clearances and creepage distances
Dimensions (W x H x D) in mm
1-wire connection 6ES7924-2AA20-0Ax0
For 3-wire initiators 6ES7924-2CA20-0Ax0
System cabling for S7-300
Manual, 09/2018, 70327045899
Technical specifications for terminal modules TP1 and TP3 without LED
6.7 Technical specifications for terminal modules
Any, except overhead
Screw-type terminal or push-in system
9 mm
0.5 ... 2.5 mm
2
0.5 ... 2.5 mm in accordance with DIN 46222-1
2
0.2 ... 2.5 mm
2
According to DIN 5264 B 0.6 x 3.5 mm
0.4 ... 0.7 Nm
0.29 kg
0.25 kg
IEC 60664-1, IEC61131-2,
CSA C22.2 No 142 UL 508, VDE 0160,
overvoltage category II,
pollution degree 2
Approx. 130 x 76 x 60
DC
max. 50 V
1 A
2 A / byte
50-pin IDC connector with fitted strain relief
0 to + 60° C
Any
IEC 60664-1, IEC61131-2,
CSA C22.2 No 142 UL 508, VDE 0160,
Overvoltage category II,
pollution degree 2
Approx. 100 x 76 x 60
Approx. 175 x 76 x 60
Technical specifications
71