Table of Contents
Advertisement
Temperature display
In normal operation the temperature
display either shows the required
temperature in the refrigerator
section or the required temperature
in the freezer section.
Tip: To switch between temperature
displays, press the relevant button of
the section you wish to view.
The displayed temperature will flash if
a different temperature is set.
The required temperature in the
freezer section temperature display
and the alarm symbol will flash:
– If the temperature is not within the
normal temperature display range.
– The temperature in the appliance has
risen by several degrees, indicating
that the appliance is warming up too
much. At the same time an alarm will
sound.
This short-term loss of coldness is no
cause for concern in the following
circumstances:
– If the appliance doors were left open
for longer than usual, e.g. when a
large amount of food is being loaded
or taken out.
– If you have just placed fresh food in
the appliance for freezing.
The correct temperature
Setting the temperature in the
refrigerator/freezer sections
The temperature can be adjusted:
– In the refrigerator section from 3 °C
to 9 °C
– In the freezer section from -16 °C to
-26 °C
The temperatures for the refrigerator
section and the freezer section can be
adjusted using the relevant button .
Press the button repeatedly until
the temperature you want is shown in
the temperature display.
The first time you press the button the
last temperature set will flash in the
display.
The temperature value will change until
the highest setting is reached. It will
then drop back to the lowest setting.
After a short while the newly selected
temperature is set and will appear in the
temperature display.
The refrigerator section temperature set
will now light up. The temperature set
for the freezer section will now flash
until the temperature has been reached.
The temperature in the appliance will
now adjust slowly to the newly set
temperature.
23
Hide quick links:
Advertisement
Table of Contents
