Table of Contents
Advertisement
Switching on and off
Before using for the first time
Packaging material
Remove all packaging material from
the inside of the appliance.
Protective foil
The appliance is covered with a special
foil to protect it during transportation.
Do not remove the foil until the
appliance has been positioned in its
final location.
Cleaning the appliance
Please refer to the relevant
instructions in "Cleaning and care".
Clean the inside of the appliance and
the accessories.
20
Switching the refrigeration
appliance on
To enable the temperature to get
sufficiently cold inside the appliance,
allow the freezer section to run for
about 2 hours before placing food in
the appliance.
Do not place food in the freezer
section until it has reached the
required coldness (at least -18 °C).
The freezer section and the refrigerator
section can be switched on at the
same time using the right-hand main
On/Off button .
The compressor can take up to
8 minutes to switch on due to a built-
in switch delay. This delay is designed
to increase the lifespan of the
compressor.
Press the right-hand main On/Off
button to switch on the freezer
section and the refrigerator section.
The refrigeration appliance will start to
cool and the temperature required will
appear in the freezer section
temperature display. The interior lighting
of the refrigerator section will come on
when the door is opened.
Hide quick links:
Advertisement
Table of Contents
