Battery Charging; Charging Procedure - Flymo Mighti-Mo 300 Li Original Instructions Manual

5
The battery is supplied partially charged. To ensure
full capacity of the battery, completely charge the
battery in the battery charger before using your
product for the first time.
The battery can be charged at any time without
reducing its service life. Interrupting the charging
J
● Do not use other battery chargers. The supplied
battery charger is designed for the battery in your
product.
● The voltage of the power supply must correspond
with the data given on the nameplate of the
battery charger. Battery charger can operate
between 100-240V/AC.
● The battery is equipped with temperature
monitoring that allows charging only in the
temperature range between 0 °C and 45 °C. In
this manner, a high battery service life is achieved.
battery charge
indicator lights

Charging Procedure

The charging procedure starts as soon as the mains
plug of the battery charger is plugged into the socket
outlet and the battery is inserted into the charging
compartment.
Due to the intelligent charging method, the charging
Battery

Battery Charging

1. Connect the charger to the power supply – mains
2. Push the battery pack into the charger (J).
Charging Procedure
red warning light
button
charger control
light
procedure does not damage the battery. The battery
includes built-in protection against deep discharging.
When the battery is run down or discharged, the
product is shut off by means of a protective circuit:
The blade no longer moves.
voltage and operating voltage of the charger must
be the same – see "Charging Procedure".
Operate the charger only in enclosed and dry
rooms at ambient temperatures between 0°C and
45°C.
condition of the battery is automatically detected and
the battery is charged with the optimum charging
current, depending on battery temperature and voltage.
This gives longer life to the battery and always
leaves it fully charged when kept in the charger for
storage.
The charging procedure is indicated by the
charger control light flashing green
Battery charge indication
During the charging procedure, the battery charge
indicator lights show the battery capacity.
Battery charge
Indicator Lights
Battery Charged
The battery is fully charged when the battery
lights go out and the charger control light shows
a continuous green light.
Afterwards, the battery can be removed for
immediate use.
With no battery inserted, the charger control light is
solid red, indicating that the mains plug is plugged
into the socket and that the battery charger is ready
for operation.
Battery capacity
up to 40% charged
up to 80% charged
fully charged