Table of Contents
Advertisement
Troubleshooting
This section provides solutions to problems that may occur while using AP. If a problem not metioned in this
section occurs, please visit the after-sales service centor or our homepage for assistance.
Wireless access to AP is disabled.
−
First, check the IP address of the AP. The IP address is set to 192.168.111.10 by default but can be changed
by users.
−
Check the SSID of the AP.
−
Check if the Security function of the AP is enabled by selecting 'Security' from the 'Wireless' menu.
−
Check if the terminal attempting connection to AP is too far from the AP or in a shadow area.
−
If the above items are all normal, check if the AP and antenna are properly connected.
24
Advertisement
Table of Contents
