Samsung WAP-701 User Manual page 14

that supports this standard. WAP-701 can also perform Logical Link Control/Subnetwork Access Protocol
(LLC/SNAP) functions when necessary.
Bridge
WAP-701 provides a IEEE 802.11D standard bridge function, which connects WLAN and Ethernet. MAC
addresses of wireless terminals and Ethernet terminals can be registered to each port and updated every 5
seconds.
Inter-Access Point Protocol (IAPP)
This function is used to support roaming within a subnet by exchanging access information of a wireless
terminal between APs. This function roams a mobile unit to another AP when the mobile unit moves from
an area of one AP to that of another AP within a same subnet or when the AP to which the mobile unit is
registered becomes inoperable.
Roaming
When a mobile unit receiving service from an AP moves to another area outside the coverage of the AP, this
function maintains the service by automatically registering the mobile unit to the AP of the new area.
DHCP Server/Relay
WAP-701 provides Dynamic Host Configuration Protocol (DHCP) server and relay function. If a mobile unit
WAP-701 User Guide
13