Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Phantom Manuals
  4. Digital Camera
  5. v2512
  6. Manual

Phantom v2512 Manual

Ultrahigh-speed cameras
Hide thumbs Also See for v2512:

Advertisement

Quick Links

See also: User Manual
ULTRAHIGH-SPEED CAMERAS
v2512 | v2012 | v1612 | v1212 | v2640 | v1840
UHS MANUAL
When it's too fast to see, and too important not to.
®

Advertisement

loading
Need help?

Need help?

Do you have a question about the v2512 and is the answer not in the manual?

Questions and answers

Related Manuals for Phantom v2512

Summary of Contents for Phantom v2512

  • Page 1 ULTRAHIGH-SPEED CAMERAS v2512 | v2012 | v1612 | v1212 | v2640 | v1840 UHS MANUAL When it’s too fast to see, and too important not to. ®...
  • Page 2 PN: ZDOC-64110-MA-0001 Rev 4 Last Updated: November 2018...
  • Page 3 When it’s too fast to see, and too important not to. ® Phantom Ultrahigh-Speed Cameras MANUAL WWW.PHANTOMHIGHSPEED.COM 100 Dey Road Wayne, NJ 07470 USA +1.973.696.4500...
  • Page 4 Written and produced by the Marketing Department at Vision Research. The contents of this manual are subject to change without notification. PN: ZDOC-64110-MA-0001 Rev 4 Last Updated: November 2018 P H A N T O M H I G H S P E E...

  • Page 5: Table Of Contents

    Camera Overview Connectors Network Setup & Quick Start Guides On-Camera Controls & On-Screen Displays Working with Phantom CineMags Phantom PCC Software: Camera Operation, Download and File Conversion Programmable I/O Signal Architecture Measurements with PCC Accessories FAQs & Support D . C O M...
  • Page 6 Max. Resolution 1280 x 800 Fps at Max. Res 25,700 22,600 16,600 12,600 1,000,000 at 256x32 1,000,000 at 128x32 1,000,000 at 128x16 820,500 at 128x16 Fps at Reduced with FAST option with FAST option with FAST option...
  • Page 7 v2640 / v1840 Standard Mode Standard HS Bright HS Mode HS Binned (CDS) Binned Field Mode Max. Resolution 2048 x 1952 1024 x 976 2048 x 1952 2048 x 1944 1024 x 976 Fps at Max. Res 4,855 / 3,320 18,390 / 12,670 6,600 / 4,510 6,600 / 4,510...
  • Page 8 Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...

  • Page 9: Camera Overview

    The Phantom Ultrahigh-Speed (UHS) Series consists of 1 Megapixel (Mpx) and 4 Mpx cameras. The 1 Mpx members are the v1212, v1612, v2012 and v2512. With throughputs ranging from 12 to 25 Gigapixels per second (Gpx/sec), these cameras are designed for very high frame rate applications.
  • Page 10 All Phantom Ultrahigh-Speed Series cameras are also compatible with Phantom CineMag IV and V long recording non-volatile memory. CineMag V is available in 2TB and 8TB capacities, and can accurately save a 288GB Cine to an attached Phantom CineMag V in about 4.5 minutes.
  • Page 11 PCC software with the camera. IMAGE MONITORING & VIDEO OUTPUTS Phantom UHS camera models have two 1.5G HD-SDI outputs on the rear of the camera and a component video/12V power viewfinder output on the side of the camera. The systems supported are: 720p at 50, 59.9, 60 Hz, 1080p (also psf and i) at 23.9, 24, 25, 29.9, 30.
  • Page 12 REAR CONNECTOR PANEL View of Phantom UHS-12 and UHS-40 rear connector panel. A complete cable connector reference and pin-out guide is available in the last section of this manual. Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...

  • Page 13: Connectors

    RANGE DATA Used to stamp images with acquisition data (azimuth and elevation) GPS input for GPS timing, longitude and latitude REMOTE CONTROL PORT RS-232 and Power (for Phantom Remote Control) 1Gb ETHERNET CAT5 UTP (for control and data transfer) 10Gb ETHERNET...
  • Page 14 SIDE CONNECTOR VF PWR OR COMPONENT VF 7-pin Fischer provides +12V power and component signal for viewfinders. Also works with the Phantom YPRPB cable. Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...

  • Page 15: Network Setup & Quick Start Guides

    All Phantom UHS cameras come with standard Gigabit (Gb) Ethernet and 10-Gigabit (10Gb) Ethernet for use as a secondary means of connection. With 10Gb Ethernet, the Phantom UHS cameras can achieve significantly higher download speeds, which makes them a great option for saving large files quickly out of RAM.
  • Page 16 ASSIGNING A Gb CAMERA NETWORK Connecting the Phantom UHS camera to a Gb Ethernet is straightforward, as virtually all computers will be compatible with no special equipment or drivers involved. The main thing that needs to be done is to reassign the network settings of the Ethernet port to detect the IP address range of Phantom cameras.
  • Page 17 STEP 4: A SSIGNING A 10 Gb CAMER A NE T WORK Just like assigning the 100.100 IP range for standard Gb Ethernet, the Phantom 10Gb Ethernet network needs to be assigned to work in the 172.16 IP range. The camera should be powered on and physically connected to the 10Gb network card or Thunderbolt adapter.
  • Page 18 HD-SDI 1 or VF HD-SDI connectors. MOUNT PHANTOM CINEMAG (OPTIONAL) Insert a Phantom CineMag IV or V if applicable. For detailed instructions, see ‘Working with Phantom CineMag’ section. LAUNCH PCC SOFTWARE Double-click the PCC icon located on the desktop. Camera should be recognized immediately if connected and network settings are correct.
  • Page 19 3. Ensure the EDR (Extreme Dynamic Range) is set to zero (0). 4. Set ‘Post Trigger’ to zero (0) by: • Moving the ‘T’ (Trigger Position) slider to the right, or • Enter zero (0) into the ‘Last’ data entry field. Click on the CSR button to perform a Current Session Reference.
  • Page 20 Click the down-arrow of the ‘Save Cine...’ button. Select ‘Save RAM Cine to Flash’ (in pop-up window). Click the ‘Save’ button to save the Cine file onto the Phantom CineMag. Confirm ‘Flash Cine Save’ before deleting from internal memory. CONFIRM CINEMAG SAVE Select the new Flash Cine from the top ‘Play / Cine’...
  • Page 21 Chapter 3: Net work Setup & Quick Star t Guides | 13...
  • Page 22 (exposure assist) mode. In ‘Playback’ mode, it is the ‘Rewind,’ ‘Pause’ or ‘Fast-Rewind’ button (hold one second). PLAYBACK Tap to enter ‘Playback’ mode and select the Cine stored in internal RAM / Phantom CineMag IV / V for playback. MENU Tap the ‘Menu’...

  • Page 23: On-Camera Controls & On-Screen Displays

    O L S Chapter 4: On-Camera Control s & On-Screen Displays | 15...
  • Page 24 Cine Stored: Recording has ended and a Cine is stored in RAM memory. The Cine must be erased from the RAM to begin recording again. Playback: The camera is in ‘Playback’ mode. RAM Cines can be reviewed, edited and saved to flash. Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 25 Displays the frame count and recording time based on the current camera settings. FLASH MEMORY STATUS Indicates the memory size of the Phantom CineMag (if present) and the total recording time available. EF LENS APERTURE DATA Displays the f-stop (aperture) the lens. Valid for Canon EF mounts only.
  • Page 26 MENU OVERVIEW The Phantom Ultrahigh-Speed On-Camera Control menus provide access to almost all camera settings. The menu is activated with a press of the menu knob and displayed through the camera’s video outputs (SDI) as a video overlay, on top of the live image.
  • Page 27 1/6 CAMERA The CAMERA menu page includes controls for the fundamental settings. SPEED Sets the acquisition frame rate in frames-per-second. SHUT TER Sets the exposure time. Sets the Exposure Index (EI). AUTOE XPOSURE Enables autoexposure for changing lighting conditions. WHITE BAL ANCE For color cameras, place a white or neutral gray object in front of the camera.
  • Page 28 VIDEO SYSTEM Sets the video output to one of the valid video systems. The video outputs will change immediately. However, the new video system must be confirmed to take effect. Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 29 3/6 SETTINGS The SETTINGS page allows for user setups to be saved and recalled. 0 – 5 There are six available entries. By selecting one of the slots, users can save or recall that particular setup to quickly change all parameters of the camera at a later date. The values in parentheses are meant as a quick reminder of camera settings.
  • Page 30 Phantom 100.100 network. This is set using Phantom PCC software. 10Gb IP-defined secondary 10-Gigabit (10Gb) IP address which can be used with a 10Gb IP range within the Phantom 172.16 network. This is set using Phantom PCC software. 5/6 AUTO The AUTO menu allows for control of some of the camera’s automatic functions.
  • Page 31 Sets the Red, Green and Blue channels separately for the Gain, Pedestal and Gamma image processing settings. ER A SE CINEMAG Erases the entire contents of an installed Phantom CineMag IV / V. MEMORY PARTITIONS Sets the number of partitions to segment the RAM for Multi-Cine recording. The RAM is divided evenly.
  • Page 32 Cine. A long press on the forward or reverse buttons will start a fast- forward and fast-reverse playback. P L A Y B A C K & S A V E Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 33 Use the scroll knob to go through the Cine. Set the in-point by selecting ‘Set In.’ This will be the first frame of the Cine saved to the installed Phantom CineMag. Scroll to the last frame you want to save and select ‘Set Out.’ SAVE THE CINE Select ‘Save’...
  • Page 34 PHANTOM CINEMAG IV & V INDICATORS On the back of the Phantom CineMag are a number of LED indicators that show the current Phantom CineMag status. MAG CAPACIT Y INDICATOR When a Phantom CineMag is empty, all lights will be illuminated. As material is recorded to the mag, the lights will turn off.

  • Page 35: Working With Phantom Cinemags

    INTRODUCTION The Phantom UHS-12 and UHS-40 cameras offer a CineMag compatibility option. Cameras that have CineMag compatibility may use either a CineMag IV or CineMag V. Only UHS-11 and UHS-10 cameras are compatible with CineMag II. The Phantom CineMag is a high-speed solid-state storage module, compatible with the Phantom Ultrahigh-Speed cameras for recording, and the CineStation IV for downloading.
  • Page 36 (OSD). REMOVING A CINEMAG To remove the Phantom CineMag, press the red tab on the top door and pull the CineMag out of the camera. The CineMags are hot-swappable and the camera can remain on during this procedure, but ensure the camera is not writing or reading from the CineMag before removing it.
  • Page 37 Or use Phantom Video Player (PVP) Software in a similar manner when using video playback. Then click the green ‘Save Cine…’ button. In the ‘Save Cine’ dialog box, choose ‘Cine Raw’ as the file format, navigate to the folder where you wish to save the clip and click ‘Save.’...
  • Page 38 The CineStation IV is a simple device meant to quickly and efficiently download the contents of a CineMag IV. When connected to a computer running Phantom software, the CineStation behaves almost identically to a camera, except that no capture or live functions will be enabled.
  • Page 39 Generally, the computer and all devices must be re-booted after the driver installation. Ensure that when the Phantom software was installed, the Phantom 10Gb driver was also installed during that process. If not, it must be installed separately—contact support for instructions.
  • Page 40 Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 41 Vision Research website: www.phantomhighspeed.com PRE-INSTALLATION Phantom Camera Control (PCC) software is certified to operate with the following Microsoft Windows operating systems: Windows 7 Pro, Window 8.1 and Windows 10. The computer and cameras must be associated with the same sub-network to communicate with one another.
  • Page 42 Phantom CineMag. PVP is extremely effective when used with high-resolution cameras since most computers are not powerful enough to view live or captured raw files smoothly. Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 43 This image may differ slightly to that of the image being output over the camera’s 3G HD-SDI port due to display differences in the video monitor and computer screens. Chapter 6: Phantom PCC Soft ware | 35...
  • Page 44 The ‘Zoom Fit’ toolbar button resizes the images to fit the panel. Images can also be zoomed to a specific magnification ratio by selecting a number from the pull-down list to the right of the ‘Zoom Fit’ button. Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 45 Set Time: Synchronizes the timestamps embedded in the recorded image data to the computer’s clock. Bit Depth: All Phantom UHS cameras operate in 12-bit mode only. Partitions: Select the number of desired partitions (evenly divided memory segments) from the ‘Partitions’ pull-down menu. For basic camera setups, this should be set to one.
  • Page 46 The trigger position is indicated in the ‘Last’ pull-down menu and as the ‘T’ slider along the timeline. The trigger position is exactly when the trigger signal will be detected in the Cine. Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 47 Phantom CineMag immediately after recording. • ‘Auto play Video Out’: Begins playback after recording. The range marked under ‘Auto play Video Out’ affects both playback and saving to the Phantom CineMag. • ‘Restart Recording’: When enabled, automatically restarts the recording process after the ‘Auto’...
  • Page 48 Set ‘R/S’ (Run/Stop) mode by selecting the ‘Direct Recording to CineMag’ box in the ‘Flash Memory’ section. Start recording by clicking the red ‘Record’ button. Once the camera is recording directly to the Phantom CineMag, the ‘Record’ button changes to a ‘Stop Recording’ button.
  • Page 49 Locate the last image of the Cine to be saved and click the ‘Mark-Out’ button. Click ‘Play, Speed & Option’ and enable (check) ‘Limit to Range.’ Under the ‘Video Control’ buttons, click the ‘Jump to Start’ button and review the edited Cine. Chapter 6: Phantom PCC Soft ware | 41...
  • Page 50 Flash.’ W ORKING WITH CINE FILES The images recorded on the camera’s RAM or Phantom CineMag are stored in a Vision Research proprietary RAW (uncompressed) file structure called a ‘Cine’ file. These Cine files can be converted to industry standard formats (ProRes, H264, DPX, DNG, TIFF, JPEG and more) with PCC software provided by Vision Research.
  • Page 51 Navigate to the destination folder in the ‘Multifile Convert Destination’ dialogue window and select the file format. The ‘File Name’ will depend on the type of file format you are converting to. Chapter 6: Phantom PCC Soft ware | 4 3...
  • Page 52 Once the ‘Convert’ button is clicked, a progress window appears for the duration of the conversion process. Each converted Cine will be placed in its own folder named after the original Cine file. View of Phantom v2640 rear connector panel. Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 53 ‘PROGRAMMABLE’ VERSUS ‘ASSIGNABLE’ Phantom cameras have long employed the use of auxiliary ports where one BNC port, whether on the camera body, capture cable or Break-out-Box, can be assigned to one of a few different signals. This has been necessary due to an increasing number of signals and a limited amount of physical space on the camera and pins on the capture connector.
  • Page 54 After selecting the signal assignment, further configuration is possible by clicking the gear symbol next to each port. The ‘Pulse Control’ menu is opened, as shown on the next page. Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...

  • Page 55: Programmable I/O Signal Architecture

    A graphic representation of the signal behavior is also displayed. However, this is not to scale and should be used as reference only. Use of this feature requires an oscilloscope to truly visualize the signals and the subsequent changes with each adjustment. SUMMARY OF PULSE PROCESSOR SETTINGS Invert: Inverts the signal at the output of the pulse processor.
  • Page 56 IRIG-B (at RS-232 levels) which follows the internal time base of the camera. It is recommended not to process the ‘TC-Out,’ since a processed signal may no longer represent a standard or accurate time code. Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 57 Auto-Trigger: Used to output a hardware trigger signal or pulse with the duration. Software Trigger: An active high-output signal (pulse) generated as a result of the trigger protocol command. Recording: An active high-output signal. When active, indicates the camera is recording into a RAM partition.
  • Page 58 Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 59 INTRODUCTION Included in PCC is a set of 2D motion analysis tools which go a step beyond the visual when it comes to providing valuable data about the subject. Analysis can perform timing, position, distance, velocity, angle and angular speed measurements, as well as track multiple points to compute and graph their XY-coordinates, speed or acceleration.
  • Page 60 However, the ‘Origin’ can be changed when performing measurements. Each coordinate consists of two numbers (x1, y1) indicating the position of a pixel in the image on the two-dimensional plane from the ‘Origin’ point. Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 61 Your choice of origin will be largely dependent on the subject and the type of motion being studied. The ‘Default Origin’ and ‘Set Origin’ buttons will be disabled if any of the ‘Instant Measurements’ or ‘Collect Points’ options are active. Once the origin point is set, activate ‘Instant Measurements’...
  • Page 62 If the ‘Auto advance to next image during collect points’ has been enabled in the ‘Preferences>Measurements’ tab, step backward to the image with the defined points. Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 63 DEFINE POINT PARAMETERS Once the points are selected, click the ‘Current Point’/ ‘Options’ button to further define each point: Autotrack active: Turns on and off autotracking of the selected point. Show rectangles: Displays the ‘Target Area’ and ‘Search Area’ rectangles for the point. The region sizes are defined by the ‘Template area size’...
  • Page 64 Data Acquisition (DAQ) module can also be used to acquire data from a wide range of sensors and synchronize it with slow-motion video images recorded on a Phantom camera, using Phantom Camera Control (PCC) software. Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 65 SDKs allow, for example, automotive manufacturers to create command line scripts to control a Phantom camera directly from a computer or run in a Graphical User Interface specifically designed to perform or analyze airbag tests without having to use PCC. Anyone who wishes to have more control over their Phantom camera or the Cine files recorded would benefit from using one of these Phantom System Developer Kits.
  • Page 66 Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...

  • Page 67: Accessories

    INTRODUCTION Phantom Ultrahigh-Speed cameras are shipped in a sturdy Pelican case with a power supply, Ethernet cable, PCC software and printed manual. There are accessories to facilitate the use of the cameras for different applications. VIEWFINDER & MONITOR OPTIONS Viewfinders and monitors are available from third party sources.
  • Page 68 LENS MOUNTS Phantom Ultrahigh-Speed cameras ship with F-mount standard. Other lens mount options are available through Vision Research: NIKON F- MOUNT The Nikon mount is compatible with both manual F-mount and newer G-style lenses. A mechanical lever on the front of the mount allows for manual adjustment of the aperture on G-style lenses.
  • Page 69 INSTALLING A LENS MOUNT Installing a new lens mount is simple. Remove the four 9/64 socket screws that are attaching the current lens mount. Ensure all shims that are behind the mount are transferred to the new mount. In the case of the Canon mount, ensure the camera is powered down. Carefully align the pins to the plug found behind the mount.
  • Page 70 FRONT VIE W (w ith and w ithout CineMag) M E C H A N I C A L D R A W I Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 71 RE AR VIE W (w ith and w ithout CineMag) I N G S Chapter 10: FAQs & Suppor t | 6 3...
  • Page 72 LEF T / RIGHT (w ithout CineMag) Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...

  • Page 73: Faqs & Support

    LEF T / RIGHT (w ith CineMag) Chapter 10: FAQs & Suppor t | 65...
  • Page 74 TOP / BOT TOM (w ithout CineMag) Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 75 TOP / BOT TOM (w ith CineMag) Chapter 10: FAQs & Suppor t | 67...
  • Page 76 Or they can be configured as a single 4:4:4 Dual-Link HD-SDI port. C O N N E C T O R P I N - O U Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 77 All pin-out diagrams refer to the connector on the camera body. Part numbers indicated are for the cable’s connector. Gb ETHERNET CONNECTOR Gb Ethernet port 8-pin Fischer Part #SS 103 A058-130 WIRE NOMENCLATURE/FUNCTION Blue/White ETHRXP / 10/100/1000BASE-T Ethernet Receive (positive) Blue ETHRXN / 10/100/1000BASE-T Ethernet Receive (negative) Brown/White...
  • Page 78 RxD / RS-232 Receive Data Unused +5V/0.2A / +5VDC (Direct Current) positive power to the Phantom camera at 0.2 amps. pps In / Parts-per-Second In pps Ground / Parts-per-Second Ground Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 79 CAPTURE CONNECTOR NOMENCLATURE/FUNCTION Capture port Event-In / active-low isolated input; signal must be active when strobe is high, and be 30 µs long minimum. 19-pin Part #PTO6A-14-19S Trigger / active-low isolated input. Can be activated by a switch to ground. The trigger pulse needs to be at least three microseconds long.
  • Page 80 50 feet (16 meters). IOGND2 / RS232 Ground - All the serial ports are not isolated (referred to system ground). As such, they should only be connected to properly earthed equipment. Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 81 VIEWFINDER CONNECTOR Component VF port 7-pin Fischer Part #S103.A057 NOMENCLATURE/FUNCTION GND / Power Ground GND / Power Ground PB HD Blue Channel PB HD Red Channel Y HD Green Channel GND / Power Ground +12V Positive 12VDC / 1.5 Amp Chapter 10: FAQs &...
  • Page 82 The UHS -12 (v2512, v2012, v1612 and v1212) and UHS - 4 0 (v18 40 and v26 40) all have a 10 Gb Ether net inter f ace. Tell me more about it and how to use it. Yes, a copper UTP 10Gb Ethernet interface is standard on these cameras. When properly configured, this allows for Cine downloads at speeds up to four or five times that of the Gb Ethernet interface.
  • Page 83 W ill the Phantom Remote Control Unit (RCU) w or k w ith the UHS -12 (v2512, v2012, v1612 and v1212) and UHS - 40 (v18 4 0 and v26 40) camer as? Yes. You can connect through the remote port on the camera either with a ‘Remote’ cable or Bluetooth dongle.
  • Page 84 Tell me more about the GPS por t on the back of the camer a. The GPS port on the Phantom UHS-12 and UHS-40 cameras can be used to provide date, time and location information from the GPS satellite network. Vision Research sells a compatible GPS receiver (VRI-GPS-18X-LVC-5M).
  • Page 85 What does the AUTO/ON/OFF sw itch do? Prior to the introduction of the Phantom UHS-10 Series (the predecessors to the UHS-11 and UHS-12 Series), Phantom cameras did not have a physical power switch. Instead, the camera powered up any time an appropriate DC voltage appeared on the power input to the camera.
  • Page 86 An optional Capture Cable is available to connect to the Capture Connector and provides access to: • Ready • Strobe • A-Sync • Pre-trigger/Memgate • Video All other signals are accessible by using a Phantom Break-out-Box. See the related FAQ. Vision Research, Inc. | Phantom Ultr ahigh-Speed Camer a Manual...
  • Page 87 Yes. You need to order the optional Canon EOS lens mount and use it with one of the tested and supported lenses. (Part #VRI-MNT-EOS-VSERIES.) Can you descr ib e the cooling sy stem for the Phantom UHS -12 and UHS - 40 camer as? To minimize noise and maximize image quality on any digital high-speed camera, it is important to control the sensor temperature.
  • Page 88 The process then repeats. What is the dif ference bet ween the UHS -12 Ser ies (v2512, v2012, v1612 and v1212) and the prev ious UHS -11 Ser ies...
  • Page 89 What is FA ST option and is it included w ith the UHS -12 and UHS - 40 camer as? FAST option is an export controlled option. In the UHS-12 cameras (v2512, v2012, v1612 and v1212) FAST option allows up to 1,000,000 fps at lower resolutions and minimum exposures to be set as low as 265 ns, depending on the camera model.
  • Page 90 SUBMIT TING A SUPPORT TICKE T For technical product support, operation and application information or to request an RMA, please submit a ticket by filling out a form at www.phantom-service.force.com or by emailing us at phantom-support@ametek.com. LIVE CUSTOMER AND TECHNICAL SUPPORT...
  • Page 91 UHS-12 SERIES CE-2015 Phantom UHS-12 products are in compliance with the requirements of the Low Voltage Directive (LVD) 2014/35/EU, the Electromagnetic Compatibility (EMC) Directive 2014/30/EU and the Federal Communications Commission (FCC) CFR 47, Part 15 at the time of product manufacture and carry the CE-marking.
  • Page 92 Written and produced by the Marketing Department at Vision Research. The contents of this manual are subject to change without notification. PN: ZDOC-64110-MA-0001 Rev 4 Last Updated: November 2018 WWW.PHANTOMHIGHSPEED.COM 100 Dey Road Wayne, NJ 07470 USA +1.973.696.4500 P H A N T O M H I G H S P E E D...

This manual is also suitable for:

V1612V2012V1840V1212V2640