Hitachi Compute Rack 220H Replacement Manual page 63

Installing a fan
1. Orient the fan to the direction where the fan connector aligns with the
connector on the system.
2. Insert the fan into the fan slot, and then push the fan until the release latch
of fan is locked.
3. Install the front top cover of the system.
See Installing the front top cover
4. Reinstall the system to the rack cabinet.
See Sliding the system unit into a rack cabinet
Replacing parts
Hitachi Compute Rack 220H CRU Replacement Guide
on page 3-10.
on page 3-6.
4-11