Hitachi Compute Rack 220H Replacement Manual page 56

3. Hold the lever and push the HDD/SSD into the extension storage bay slowly.
When the HDD/SSD stops at the bottom, slowly close the lever to lock the
HDD tray.
NOTICE
Figure 4-3: Installing an HDD/SSD
4. After a while, confirm that the HDD status LED on the HDD tray of the
replacing HDD/SSD turns off or lights solid green.
4-4
Install the replacing HDD/SSD in the same extension storage bay
where the failed HDD/SSD has been removed. Otherwise, data may
be lost.
3
During rebuilding data in progress, the HDD status LED blinks
amber.
Do not turn off the system power during the data rebuild.
Replacing parts
Hitachi Compute Rack 220H CRU Replacement Guide
2