Floppy Diskette And Communications - SWF SB Series User Manual

7.1.6

Floppy Diskette and Communications

No. Error Name
600 No diskette.
601 No sectors on the diskette
602 No design data in the diskette
603 Remove the write protect tap.
604 Diskette damaged
605 Insufficient memory capacity
606 Diskette removed from FDD
Bad sector error during floppy
607
reading
Bad sector error during floppy
608
writing
Diskette error whose cause is
609
unknown
610 Diskette error
611 ZSK design error
612 BARUDAN design error
613 Bad sector error
614 Operating program install error
630 Error found in the read data
640 Network device error
650 USB error
Error Description
There is no diskette inside the
FDD.
A floppy diskette is not formatted
or the format is different.
There is no embroidery design
saved in a floppy diskette.
When copying embroidery designs, the
diskette write protect tap is enabled.
A floppy diskette is damaged.
There is unoccupied space for
copying in a floppy diskette.
A floppy diskette is removed in the
middle of FDD operation.
The floppy diskette's sector is bad.
The floppy diskette's sector is bad.
Errors are developed whose cause
is unknown while the floppy
diskette is in operation.
Errors are developed whose cause
is unknown, while the floppy
diskette is in operation.
The operating program is installed,
the operating program file name
does not match or does not exist.
The data read through the tape
reader develops errors.
The network devices are not
connected.
The USB driver is not ready
7 7 - - 3 3
Handling
Insert a diskette into the FDD.
Format a diskette or replace it with
other diskette.
Replace the diskette.
Disable the write protect tap.
Format a diskette or replace it.
Replace the diskette with a new one.
Insert the diskette and start are work
again.
Format the diskette or replace it.
Format the diskette or replace it.
Format the diskette or replace it with
another one.
Format the diskette or replace it with
another one.
Enter data through the tape reader
again.
Check the status of the network
devices.
Check whether the memory system
of the USB memory is FAT16.