Auto Off Timer - Fujitsu Airstage UTY-RNRY Operating Manual

• Set the Operation Stop Time
(4) Touch the [Operation Stop time] on the "Off Timer"
screen. "Operation Stop Time" screen is displayed.
Off Timer
Enable/Disable
Operation Stop Time
Cancel
(5) Set the time by touching [ ] or [ ].
Operation Stop Time
in
0.5
Cancel
When [OK] is touched, the display returns to the "Off
Timer" screen.
Note
Up to 24 hours can be set.
• Apply the setting.
(6) Touch the [OK] on the "Off Timer" screen. After the set-
ting change screen is displayed, the display returns to
the "Timer Setting" screen.
Off Timer
Enable/Disable
Operation Stop Time
Cancel

3-3-3 Auto Off Timer

(1) Touch the [Auto Off Timer] on the "Timer Setting"
screen. When the "Password Verifi cation" screen was
displayed, enter the password and touch [OK].
Timer Setting
On Timer
Off Timer
Auto Off Timer
• Enable the Auto Off Timer.
(2) "Auto Off Timer" screen is displayed. Touch the [Enable/
Disable] on the "Auto Off Timer" screen.
Auto Off Timer
Enable /Disable
Operation Stop Time
Time Range Setting
Cancel
Fri 10:00AM
[Enable]
[in 0.5 hr]
OK
Fri 10:00AM
hr
OK
Fri 10:00AM
[Enable]
[in 0.5 hr]
OK
[Disable]
[Disable]
[Disable]
Back
Fri 10:00AM
[Dnable]
[in 30 min.]
[ – ]
OK
(3) "Enable/Disable" screen is displayed. Touch the [En-
able].
Enable/Disable
Cancel
When the [OK] is touched, the display returns to the
"Auto Off Timer" screen.
• Set the Operation Stop Time
(4) Touch the [Operation Stop time] on the "Auto Off Timer"
screen.
Auto Off Timer
Enable /Disable
Operation Stop Time
Time Range Setting
Cancel
(5) The "Operation Stop" time screen is displayed. Set the
time with [ ] or [ ]. The time can be set within the 30
to 240 min. range in 10 min. units.
Operation Stop Time
After the Manual Operation
in
30
min.
Cancel
When the [OK] is touched, the display returns to the
"Auto Off Timer" screen.
• Set the time range of Auto Off Timer
(6) Touch the [Time Range Setting] on the "Auto Off Timer"
screen.
Auto Off Timer
Enable /Disable
Operation Stop Time
Time Range Setting
Cancel
(7) "Time Range Setting" screen is displayed. Touch the
[Time Range] .
Time Range Setting
Time Range
Start Time
End Time
Cancel
(8) "Time Range" is displayed. When specifying the "Auto
Off Timer" enabled time range, touch [Range Spec.]
and when setting all day enable, touch [Continuous].
Time Range
Range Spec.
Cancel
When the [OK] is touched, the display returns to the
"Time Range Setting" screen. When the [Continuous]
was selected, go to (14).
Enable
Disable
OK
Fri 10:00AM
[Enable]
[in 30 min.]
[ – ]
OK
Fri 10:00AM
OK
Fri 10:00AM
[Enable]
[in 30 min.]
[ – ]
OK
Fri 10:00AM
[Continuous]
[--:--]
[--:--]
OK
Continuous
OK
En-6