PREPARATION
Continuous runtime
3
i. This lawn mower is supplied with two battery packs for
your convenience and to increase the run time during
operation providing an almost unlimited run time to cut
over 1200m
. To utilise the continuous runtime feature,
2
ensure both batteries are fully charged before first
operation.
ii. Once the first battery becomes depleted during operation,
the second battery can be installed, replacing the used
battery to continue mowing.
iii. Recharge one battery in the supplied 1 hour fast charger
whilst using the other supplied battery.
Fit the battery
4
i. Lift the battery compartment cover on the lawnmower
deck and slide the battery along the guide rails ensuring
the battery locks into position.
ii. Insert the isolator key.
iii. To remove the battery, stop the lawnmower, lift the battery
cover and remove the isolator key, activate the release
latch on the battery and slide the battery out of the
chamber.
AFTER SALES SUPPORT 0345 605 2068
23
Need help?
Do you have a question about the S4042X2CR and is the answer not in the manual?
Questions and answers