Troubleshooting; Error Messages - Soleus Air 000 BTU Evaporative Portable Air Conditioner and 14 Owner's Manual

TROUBLESHOOTING

Before seeking repair or service, please check the following:
PROBLEM
Unit does not operate or
only runs in fan mode.
Cooling efficiency is not
satisfactory.
Unit is noisy or vibrates.
The unit starts and
stops frequently.

ERROR MESSAGES

Diagnostic system indicators appear if any of the following interrupts operation of the unit. The unit may require simple
maintenance or repair by a qualified service technician.
CODE
FAULT E2
FAULT E3
FAULT E4
FAULT E5
FAULT E7
POSSIBLE CAUSE
Is the unit plugged in?
Is the main power supply on?
Is the water container full indicator light on?
Is the timer set?
Is the air inlet or outlet blocked?
Is there any other heat source in the room?
Are the air filters dirty?
Is the temperature setting suitable?
Is the fan speed set at low?
Is the machine positioned unevenly on a
level surface?
Is the voltage from the power source correct?
Is the exhaust hose positioned incorrectly?
DIAGNOSIS
Room temperature is outside the proper
working range of the unit.
Faulty coils.
Internal frost in the unit.
Unit malfunctions.
Water container is full.
REMEDY
Securely plug the power cord into the wall outlet.
Reestablish the main power supply.
Empty the water container.
Change timer settings.
Clear the blocking.
Move the heat source.
Clean the air filters.
Change the temperature setting.
Increase the fan speed.
Place the unit on a level surface.
Use a proper power source.
Position the exhaust hose correctly and keep the
exhaust hose straight as possible.
ACTION
Place unit in proper operating conditions.
Seek repair or service.
Wait for unit to melt internal frost.
Seek repair or service.
Empty water container.
12