Chapter 2 Installation and Connection
5 . When the "Cancel (C)" button on the lower right-hand side of the installation display screen changes to "Closed (C)"
means that the installation has been completed.
Please press "Close (C)" button.
* Even if the progress bar indicates 100%, installation has not yet been completed Please wait until the "Cancel
(C)" button changes to "Close (C)".
6 . Please restart the computer.
7 . Next, perform the initial setup of NeoFace Access Control Manager. Please launch
the command prompt and execute the following command.
cd C:¥NEC¥NFA¥bin
FaceServerInitialSetup.vbs <The path of the shared folder used for maintaining logs> <DB synchronization setting
network>
(Example) FaceServerInitialSetup.vbs ¥¥xxxx.xxxx¥share¥log 192.168.10.0/24
* The following log can be used to confirm if the initial setup of the installation process has been completed.
C:¥NEC¥NFA¥log¥NFA_FaceServerInitialSetupApp_log.csv
Installation is completed if "NeoFace Access Control Manager initial setup done." is displayed at during
installation.
80
NeoFace Access Control User's Guide
Setup
5.