Installing And Operating The "Clv-Setup" Pc Software; Preparing The Installation; Carrying Out The Installation - SICK CLV 45 Series Operating Instructions Manual

Chapter 10
10-20
Appendix
10.4

Installing and operating the "CLV-Setup" PC software

The scope of delivery of the CLV includes a CD-ROM containing the "CLV-Setup" software.
The software can be installed on a PC with the following minimum configuration: Processor
80486, 66 MHz frequency, 16 MB RAM, CD drive, serial interface and mouse (recommen-
ded) as well as an operating system Windows 95
Approximately 26 MB of hard disk space is required to install CLV-Setup, CLV Assistant,
CLV-Setup Help, and the off-line browser "I-ViewPro
10.4.1

Preparing the installation

1. Make sure you have the CD-ROM at hand.
2. Connect the CLV to the AMV/S 40 connection module (refer to
ting the supply voltage, Page
3. Connect the PC to the terminal interface of the CLV using an RS-232 data connection
cable (AMV/S 40: Connect the PC to the internal 9-pin "Service" plug).
(refer to Chapter 5.5.5 Connecting the CAN interface, Page
4. Switch on the supply voltage of the AMV/S 40.
After the start the CLV confirms the successful self-test with a beeper sound and shortly
afterwards starting of the reading mode is signaled by two consecutive sounds. The
"Device Ready" LED lights up.
5. Switch on the PC and start Windows
10.4.2

Carrying out the installation

The CLV-Setup installation program creates a main directory "CLV" with subdirectories and
the necessary links during the installation. A de-installer is also installed automatically so that
you can remove CLV-Setup from the PC at any time. As from Version V2.6 CLV-Setup is only
supplied and maintained as a 32-bit program.
First installation
1. Shut down all the applications under Windows!
2. Insert the CD-ROM in the CD drive.
3. Select the R dialog box in Windows.
UN
Enter the following text in the O
Confirm the dialog box with "OK".
– or –
Open the Windows Explorer, open the CD drive symbol and double-click the file
"setup.exe".
The installation program is started and guides you through the installation procedure
with screen messages. The program asks you for your user name and company name.
This information appears as a header in CLV-Setup printouts. Depending on the selec-
ted configuration the CLV-Setup, CLV Assistant and the "CLV-Setup Help" online help
programs are then installed.
4. If required, install the "I-ViewPro
want to do so). If you choose not to install the "I-ViewPro
ches your hard disk for the "Netscape Navigator
up Help" online help.
© SICK AG · Division Auto Ident · Germany · All rights reserved
TM /98 TM , Windows NT
TM ".
5-4).
list field: "X\setup.exe" (X = Drive character).
PEN
" HTML browser (the system asks you whether you
TM
" and uses it to display the "CLV-Set-
TM
Operating Instructions
CLV 45x Bar Code Scanner
TM or Windows XP
Chapter 5.5.3 Connec-
5-6).
TM " browser, the system sear-
8 009 139/K949/06-06-2002
TM .