Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Printer Accessories
  5. BW PCL PRINTER KIT-J1
  6. Installation procedure

Canon PCL PRINTER KIT-J1 Installation Procedure

Hide thumbs Also See for PCL PRINTER KIT-J1:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
PCL PRINTER KIT-J1
Installation Procedure
Follow the instructions herein when installing the PCL PRINTER KIT-J1 to its host
machine.
PUB No.F-IM-6472-000
E N G L I S H
PRINTED IN JAPAN or CHINA

Advertisement

loading

Related Manuals for Canon PCL PRINTER KIT-J1

Summary of Contents for Canon PCL PRINTER KIT-J1

  • Page 1 PCL PRINTER KIT-J1 Installation Procedure Follow the instructions herein when installing the PCL PRINTER KIT-J1 to its host E N G L I S H machine. PUB No.F-IM-6472-000 PRINTED IN JAPAN or CHINA...

  • Page 2: Checking Components

    1.1 Checking components 1.1.1 Checking the Contents F-1-1 32MB ROM 1 pc. 256MB RAM 1 pc. Screw (binding; M3x4) 1 pc. User software CD-ROM 1 pc. Release Note 1 pc. User's Manual CD-ROM 1 pc.

  • Page 3: Installation Procedure

    1.2 Installation procedure 4) If a Super G3 Fax Board-T1 is found, disconnect the connector [1] of the IP-modem cable. 1.2.1 Mounting to the Host Machine If an optional Super G3 Fax Board-T1 is found, the SDRAM and the super capacitor remain powered to 1) Turn off the main power switch, and disconnect the back up the image memory (even after the main power power plug.
  • Page 4 6) Remove the 128MB RAM [1] in the direction of [A]. - 2 locking levers [2] (shift in the direction of [B]) F-1-8 F-1-6 8) Disconnect the soft ID cable [1]. - 1 cable clamp [2] 7) If a UFRII LT PRINTER KIT-J2 is installed, perform steps 7-1) and 7-2).
  • Page 5 10) Remove the IP cover [1]. 12) Connect the connector [1] of the 32MB ROM to - 10 screws [2] the connector [2] of the IP PCB. - 1 screw (binding; M3x4) [3] F-1-13 13) Attach the IP cover you removed in step 10). F-1-11 11) Shift the 2 locking levers [1] back to their initial position.
  • Page 6 14) Put all the parts that you have removed back in 16) Mount the 256MB RAM [1]. place. - cable guide - soft ID cable - IP-LAN cable (if a UFRII LT PRINTER KIT-J2 is mounted) 15) Attach the LAN cover removed in step 7-1). (if a UFRII LT PRINTER KIT-J2 is mounted) When attaching the LAN cover, take care not to F-1-16...