Canon BW UFRII LT PRINTER KIT-J2 Installation Procedure
Hide thumbs
Also See for BW UFRII LT PRINTER KIT-J2:
- Installation procedure (4 pages) ,
- Service manual (34 pages)
Related Manuals for Canon BW UFRII LT PRINTER KIT-J2
Summary of Contents for Canon BW UFRII LT PRINTER KIT-J2
- Page 1 Installation Procedure Canon BW UFRII LT PRINTER KIT-J2 Sep 14 2005...
- Page 3 Canon will release technical information as the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new edition of this manual. The following paragraph does not apply to any countries where such provisions are inconsistent with local law.
- Page 4 Introduction Symbols Used This documentation uses the following symbols to indicate special information: Symbol Description Indicates an item of a non-specific nature, possibly classified as Note, Caution, or Warning. Indicates an item requiring care to avoid electric shocks. Indicates an item requiring care to avoid combustion (fire). Indicates an item prohibiting disassembly to avoid electric shocks or problems.
- Page 5 Introduction The following rules apply throughout this Service Manual: 1. Each chapter contains sections explaining the purpose of specific functions and the rela- tionship between electrical and mechanical systems with reference to the timing of operation. In the diagrams, represents the path of mechanical drive; where a signal name accom- panies the symbol , the arrow indicates the direction of the electric signal.
-
Page 7: Table Of Contents
Contents Contents Chapter 1 Installation Procedure 1.1 Checking components ............................2 1.1.1Checking the Contents..........................2 1.2 Installation procedure............................3 1.2.1Mounting to the iR Machine ........................3 1.2.2Checking the Connection ..........................4... - Page 8 Contents...
-
Page 9: Chapter 1 Installation Procedure
Chapter 1 Installation Procedure... -
Page 10: Checking Components
Chapter 1 1.1 Checking components 1.1.1 Checking the Contents 0010-7374 F-1-1 LAN cover 1 pc. User Software CD-ROM 1 pc. LAN PCB 1 pc. User Manual CD-ROM 1 pc. IP-LAN cable 1 pc. Release Note 1 pc. Wire saddle 1 pc. Network Quick Start 1 pc. -
Page 11: Installation Procedure
Chapter 1 1.2 Installation procedure 1.2.1 Mounting to the iR Machine 0010-7487 1) Turn off the main power switch, and disconnect the power plug from the power outlet. 2) Remove the machine's rear cover [1]. - 4 screws [2] F-1-4 5) Connect the LAN board and the IP board. -
Page 12: 2Checking The Connection
Chapter 1 - 4 TP screws (3x8) [2] F-1-7 F-1-9 Points to Note When Attaching the LAN Cover A grounding wire is fitted to the IP machine's IP PCB 8) Put back the machine's rear cover you removed in and IP cover. When attaching the LAN cover, be sure step 2). - Page 13 Chapter 1 User Mode key >2 > 8 > User Mode key [#SSSW] appears. 2) Press [<-] 5 times. When [REPORT] has appeared, press [OK]. 3) Press [+>] once. When [REPORT OUTPUT] has appeared, press [OK]. 4) Press [+>] 5 times. When [SPEC LIST] has ap- peared, press [OK].
- Page 15 Sep 14 2005...