Siemens 13-xx-ST-SBT Series Product Data page 199

Building Technologies
Fire Safety
Firmware update of additional CPUs
In the example given below, an update was carried out for a total of four modules.
The version test failed for module 3.
This status is indicated for 10 seconds before the reboot.
If updates are carried out for more than seven modules, the horizontal lines scroll
down and only the last seven modules are displayed.
The successful update of the modules must be tested with 'SintesoWorks.'
Module 7
Module 6
Module 5
Module 4
Module 3
Module 2
Module 1
CPU card (FC2080) FCC2004-A1
LED matrix display
34
199
008837_q_en_--
14.05.2012