Access Codes; Your Device - Nokia 5800 XpressMusic User Manual

To update the device software, you need the Nokia Software Updater application and a
compatible PC with Microsoft Windows 2000, XP, or Vista operating system, broadband
internet access, and a compatible data cable to connect your device to the PC.
Warning: If you install a software update, you cannot use the device, even to
make emergency calls, until the installation is completed and the device is restarted. Be
sure to back up data before accepting installation of an update.
To get more information and to download the Nokia Software Updater application, visit
www.nokiausa.com/softwareupdate in the United States or www.nokia-
latinoamerica.com/nsu in Latin America.
If software updates over the air are supported by your network, you may also be able
to request updates through the device.
Tip: To check the software version in your device, select
and Phone

Access codes

If you forget any of the access codes, contact your service provider.
● Personal identification number (PIN) code — This code protects your SIM card against
unauthorised use. The PIN code (4 to 8 digits) is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the code is blocked, and you need
the PUK code to unblock it.
● UPIN code — This code may be supplied with the USIM card. The USIM card is an
enhanced version of the SIM card and is supported by UMTS mobile phones.
● PIN2 code — This code (4 to 8 digits) is supplied with some SIM cards, and is required
to access some functions in your device.
● Lock code (also known as security code) — The lock code (5 digits) helps you to
protect your device against unauthorised use. The preset code is 12345. You can
create and change the code, and set the device to request the code. Keep the new
code secret and in a safe place separate from your device. If you forget the code and
your device is locked, your device will require service and additional charges may
apply. For more information, contact a Nokia Care point or your device dealer.
● Personal Unblocking Key (PUK) code and PUK2 code — These codes (8 digits) are
required to change a blocked PIN code or PIN2 code, respectively. If the codes are
not supplied with the SIM card, contact the operator whose SIM card is in your device.
● UPUK code — This code (8 digits) is required to change a blocked UPIN code. If the
code is not supplied with the USIM card, contact the operator whose USIM card is in

your device.

2. Your device
Model number: xxx.
Hereinafter referred to as xxx.
Phone mgmt.
>
Device updates.
>
Your device
Menu Ctrl. panel,
>
9