Sensor Settings; Headset - Nokia 5800 XpressMusic User Manual

Your device
off, as indicated by
and from the device are prevented. If you try to send messages, they are placed in the
outbox to be sent later.
When the offline profile is active, you can use your device without a SIM card.
Important: In the offline profile you cannot make or receive any calls, or use
other features that require cellular network coverage. Calls may still be possible to the
official emergency number programmed into your device. To make calls, you must first
activate the phone function by changing profiles. If the device has been locked, enter
the lock code.
To leave the offline profile, press the power key briefly, and select another profile. The
device re-enables wireless transmissions (providing there is sufficient signal strength).

Sensor settings

When you activate the sensors in your device, you can control certain functions by
turning the device.
Select Menu Ctrl.
>
Sensors — Activate the sensors.
●
Turning control
●
snooze alarms by turning your device so that the display faces down. Mark
rotate display
on its left side or back to a vertical position.

Headset

You can connect a compatible headset or compatible headphones to your device. You
may need to select the cable mode.
Warning: When you use the headset, your ability to hear
outside sounds may be affected. Do not use the headset where
it can endanger your safety.
Some headsets come in two parts, a remote control unit and
headphones. A remote control unit has a microphone and keys
to answer or end a phone call, adjust the volume, and play music
or video files. To use the headphones with a remote control unit,
connect the unit to the Nokia AV Connector in the device, then
connect the headphones to the unit.
Do not connect products that create an output signal as this may
cause damage to the device. Do not connect any voltage source
to the Nokia AV Connector.
When connecting any external device or any headset, other than
12
in the signal strength indicator area. All wireless RF signals to
panel. Select Phone
— Mark Silencing calls
to rotate the display content automatically when you turn the device
Sensor settings
>
and Snoozing alarms
and from the following:
to silence calls and
Auto-