Samsung URP-SU110 Quick Reference Manual page 19

3. Functions of Each Button
1. This PDA is written based on EPC Gen2 protocol, but it is designed to read 18000-6C
protocol.
: Connects serial communication between main processor and RFID module
: Connects serial communication between main processor and RFID module
: Changes serial communication value between main processor and RFID module
: Changes RFID value settings
: Starts reading tag
: Stops reading tag
: Saves tag read
4. Tag Read: Click Read icon or press "R" key on the top right corner of PDA to read the Tag
with the appropriate Read Type.
If the reader has not recognized the tag while pressing the Read key [Fn4] with its
Enable Leaks set to 0 (basic value=10), no results will show on the screen. If Time is
set to above 1, it will attempt to read the tag as many times as indicated. After making
all attempts, it will display the results.
Quick Reference Guide
Fig 17. Information Screen
19