Uhf 900Mhz (Read / Write) - Samsung URP-SU110 Quick Reference Manual

Menus on Scanner Window
1. Save: Saves barcode value in a file. (Directory: Flash Disk -> Scanner -> BarCode.txt)
2. Clear: Deletes barcode value, symbol type, symbol ID, number of success, and number of
reading on screen.
3. EPC: Converts barcode value into EPC code.
4. Info: Shows properties of Barcode Scanner.
5. Scan: Shoots beam to read barcode every time you click Scan. (You can also use the key on the
bottom right corner to scan.)
[How to Read Barcode]
1. Bring the scanner closer to read smaller barcodes. This device can read barcode at 40-
300mm distance. If you fail to read a barcode, adjust angle or distance.
2. The laser beam will make a bold red line when it is pointed at the barcode label.
1D
2D
[Incorrect Scanning]
1. The laser beam must go across the barcode.
2. The device cannot read barcode if the laser beam only covers parts of the barcode.
1D
2D

4.3 UHF 900Mhz (Read / Write)

This program is only applied to Samsung Techwin PDA with the 902.75 ~ 927.25Mhz module.
Quick Reference Guide
그림18. 1D Scanner 프로그램
Fig 14. 1D Scanner Program
17