Panasonic KX-TDA100 Getting Started page 13

1 Click "Start" "Programs"
"KX-TDA Maintenance Console"
"KX-TDA Maintenance Console".
2. a. Type the Installer Level Programmer Code
(default: 1234).
b. Click [OK].
3. Click "Connect"
the menu bar, depending on the serial
interface connection with the Hybrid IP-PBX.
Note
To connect with USB, you need to have
installed the KX-TDA USB driver. Follow the
instructions of the wizard to install the KX-
TDA USB driver.
4. a. Type the system password for installer
(default: 1234).
b. Click [OK].
5. When country/area data do not match:
a. Click [OK] to replace the country/area data
of the Hybrid IP-PBX. Replacement may
take several minutes to complete.
b. Follow the procedure described in "3
Starting the Hybrid IP-PBX" and restart the
Hybrid IP-PBX.
c. Repeat steps 1 to 4 to restart the KX-TDA
Maintenance Console.
6. Follow the instructions of the wizard and
assign the basic items (Quick Setup).
"USB" or "RS-232C" from
Getting Started 13