Customising The Hybrid Ip-Pbx - Panasonic KX-TDA100 Getting Started

2.
Plug the AC power cord into the Hybrid IP-PBX and AC outlet, and turn on the Hybrid IP-
PBX.
3.
Press the Reset Button with a pointed tool. (The RUN indicator will flash.)
4.
While the RUN indicator is flashing (within about 10 s), return the System Clear Switch to
the "NORMAL" position. Depending on the configuration, initialisation takes about 1 min to
3 min. If successfully executed, the RUN indicator will stop flashing and be kept lit.
All data will be cleared and the Hybrid IP-PBX will be initialised to the default values. The DPTs
should show the time as 01:00.
Note
Use only the AC power cord included with the Hybrid IP-PBX for the PSU.
4

Customising the Hybrid IP-PBX

KX-TDA Maintenance Console serves as an overall system programming tool for the Hybrid
IP-PBX. KX-TDA Maintenance Console's Quick Setup lets you easily configure the Hybrid IP-
PBX to receive intercom and trunk calls, as well as apply basic settings such as time and date.
Note
The contents and design of the software are subject to change without notice.
4.1 Connecting the PC
To programme the Hybrid IP-PBX, connect it to the PC with serial interface.
Serial Interface Connection
To USB Port
PC
To COM Port
PC
USB Port
RS-232C Port
RS-232C (Cross Cable)
Pin Assignments
COM Port RS-232C Port
Pin No.
Pin No.
2
3
4
5
6
7
8
Getting Started
2
3
4
5
6
7
8
11