Setting Up The Handset; Battery Charge - Panasonic BB-GT1540 Operating Instructions Manual

Temporary Confidential
GT1540_Shinsei.book Page 7 Tuesday, February 13, 2007 3:53 PM

Setting up the handset

Battery installation/
replacement
1
Press the notch of the handset cover
firmly, and slide it in the direction of
the arrow.
L If necessary, remove the old
battery.
2
Insert the battery (A), and press it
down until it snaps into position (B).
Then close the handset cover (C,
D).
B
A
D
Important:
L Use only the rechargeable
Panasonic battery.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY (1-800-
822-8837) for information on how to
recycle this battery.

Battery charge

Place the handset on the base unit for 7
hours before initial use.
L While charging, the charge indicator
on the handset lights in amber. When
the battery is fully charged, the
indicator lights in green.
Charge
contacts
Note:
L If you want to use the handset
C
immediately, charge the battery for at
least 15 minutes.
L To ensure that the battery charges
properly, clean the charge contacts of
the handset and base unit with a soft,
dry cloth once a month. Clean more
often if the unit is subject to the
exposure of grease, dust, or high
humidity.
7